Eh? C213 connector 2 wht wires... which is which?
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: Raleigh, NC, USA
Posts: 640
Likes: 0
Received 0 Likes
on
0 Posts
Eh? C213 connector 2 wht wires... which is which?
I'm doing pinouts from my Helms (93 Civic) & ran across this passenger side shock tower connector that isn't 100% clear.
The pinouts are as follows:
1: blk/red 2 Gnd
2: wht = O2 or CYP?
3: brn/blk gnd
4: w/blu tdc
5: o/blu tdc
6: wht = O2 or CYP?
7: Orn cyp
8: empty > going to put my knock sensor here
9: bly/y ckp
10: blu/grn ckp
As you see # 2 & # 6 are both white wires. I would think that # 6 = cyp since it's next to it's counterpart wire, but I just wanted to make 100% sure.
Thank you
The pinouts are as follows:
1: blk/red 2 Gnd
2: wht = O2 or CYP?
3: brn/blk gnd
4: w/blu tdc
5: o/blu tdc
6: wht = O2 or CYP?
7: Orn cyp
8: empty > going to put my knock sensor here
9: bly/y ckp
10: blu/grn ckp
As you see # 2 & # 6 are both white wires. I would think that # 6 = cyp since it's next to it's counterpart wire, but I just wanted to make 100% sure.
Thank you
Thread
Thread Starter
Forum
Replies
Last Post
godluvstegs
Honda Civic / Del Sol (1992 - 2000)
2
12-15-2010 07:08 PM