EG Goin K on boost, nt sure if k24 or k24/k20
08-01-2010, 10:03 AM
#1
Trial User
Thread Starter
Join Date: Aug 2010
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
EG Goin K on boost, nt sure if k24 or k24/k20
i recently purchased an eg with a sohc, iam lookin to do a complete swap with a K24, i keep hearing about k24/k20head but i think i rather just go with a straight k24, some head work. headstuds,rodbolts, new water pump/oil pump, seal it with a cometic gasket and boost it.
not too familiar k-series, your comments are welcomed. iam looking to make 450-550 on pump, and upgrade internals later as far as pistons and sleeves. i do want to use the arp rod bolts on the stock rods though..alond with the headstuds or golden eagle.
give me some feedback, thanks
not too familiar k-series, your comments are welcomed. iam looking to make 450-550 on pump, and upgrade internals later as far as pistons and sleeves. i do want to use the arp rod bolts on the stock rods though..alond with the headstuds or golden eagle.
give me some feedback, thanks
Thread
Thread Starter
Forum
Replies
Last Post
collinsvc15
Forced Induction
58
05-28-2011 08:27 AM
