dynoed my car need to know how badly off the dyno was
#1
Junior Member
Thread Starter
Join Date: Oct 2001
Location: mansfield, ohio, usa
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
dynoed my car need to know how badly off the dyno was
well i dynoed my car the other day and the numbers seemed really messed up to me. I am still running the setup that is listed in my sig. anyways the dyno (mustang dyno) said that i am only putting 97 hp and 98 ft lbs of torque to the wheels which i would say is impossible since my best quarter time is a 15.41 @ 88 mph. tell me what u guys think...
#2
Junior Member
Thread Starter
Join Date: Oct 2001
Location: mansfield, ohio, usa
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
Re: dynoed my car need to know how badly off the dyno was (fkncivic)
oh and another thing my friend that drives a 4 door eg with a b16 swap is running the same times as me and his car dynoed in at 137hp 101tq. i am thinking that my hp should be less than that but the torque should be around 130......
#3
Re: dynoed my car need to know how badly off the dyno was (fkncivic)
if your running 15's with b20, that about right....i say the dyno have something wacky. Is it for rwd?
#4
Junior Member
Thread Starter
Join Date: Oct 2001
Location: mansfield, ohio, usa
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
Re: dynoed my car need to know how badly off the dyno was (ProJectCvic)
well my buddy tested on that dyno as well im thinking that it wasnt calibrated right or something gay when i made my run
Thread
Thread Starter
Forum
Replies
Last Post