Dropping the tranny out 2moro..
#1
Guest
Posts: n/a
Dropping the tranny out 2moro..
anything i should be careful of this is my first time drop the tranny out i have JDM ITR swap in a 93civic si hatch...'
'
i gota install a new release bearing and pilot bearing!!
if theres any tricks of tip you could give me feel freee to help out!
damn it sucks when u got adrop a tranny jsutto put sum damn bearings in!!!
'
i gota install a new release bearing and pilot bearing!!
if theres any tricks of tip you could give me feel freee to help out!
damn it sucks when u got adrop a tranny jsutto put sum damn bearings in!!!
#2
Re: Dropping the tranny out 2moro.. (FlsFinest)
it's so much fun(sarcasim)...I hope you have a few friends helping you out since it will makes things go alot faster...make sure to label baggies for all the different bolts and make sure to take your time...Heres a write up on how to do a B-series tranny drop over on Team-Integra....Good luck Have to be logged on Team-Integra to view it I believe...
http://www.team-integra.net/se...D=957
http://www.team-integra.net/se...D=957
#3
Guest
Posts: n/a
HOLLLY CRAP wut am i getting my self into alll taht jsut to get to the clutch. omg which do i do pay 250 to get t it installd or do it my self... i ahve all the tools and many people to help me like 3 or 4 and every air toool you could think of and heand tools but its stilll going to be hard as hell
#5
Guest
Posts: n/a
Thread
Thread Starter
Forum
Replies
Last Post
VTgringo
Honda CRX / EF Civic (1988 - 1991)
15
08-06-2003 11:29 PM