Dropping the motor on a 00 Si
#1
Thread Starter
Join Date: Mar 2004
Location: Midwest, USA
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Dropping the motor on a 00 Si
Spun a bearing in my 00 Si
I gotta drive this car in a week and my friend has an extra B16a he let me use. The good thing is he knows how to help me a lot since I've never swapped bottom ends, just heads.
Bad part is I don't have much time, and he can't help till later on this week. I am afraid if I wait for him to come and do everything at once I will be too late.
So I will try to take the bottom end off myself to save time.
I'm about to just pulling off coolant hoses and unbolting mounts soon.
But I'm afriad there's a particular order in taking off the mounts.
As for the tranny/axles I am kinda stumpped on what to do.
Any good advice, any DIY write ups, pics? links?
Thanks a lot!
I gotta drive this car in a week and my friend has an extra B16a he let me use. The good thing is he knows how to help me a lot since I've never swapped bottom ends, just heads.
Bad part is I don't have much time, and he can't help till later on this week. I am afraid if I wait for him to come and do everything at once I will be too late.
So I will try to take the bottom end off myself to save time.
I'm about to just pulling off coolant hoses and unbolting mounts soon.
But I'm afriad there's a particular order in taking off the mounts.
As for the tranny/axles I am kinda stumpped on what to do.
Any good advice, any DIY write ups, pics? links?
Thanks a lot!
#2
Honda-Tech Member
Join Date: Jul 2002
Location: phoenix, az
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
Re: Dropping the motor on a 00 Si (JDMflavor_EJ)
https://honda-tech.com/zerothread?id=131949
basically the same thing.hth.
basically the same thing.hth.
Thread
Thread Starter
Forum
Replies
Last Post
lazyguy
Honda Civic / Del Sol (1992 - 2000)
1
08-22-2002 07:22 PM