A different Swap Idea: Using a Built B20 with a B18A head
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2008
Location: Bogota, C/marca, Colombia
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
A different Swap Idea: Using a Built B20 with a B18A head
Hi guys
i am planning to do this SWAP on Integra DA9 1991 LS Coupe
OEM engine B18A1
the swap idea
B20 block oem internals+B18A1 head
B18B oem intake manifold fron integra DB7
Conversion OBD0 to OBD1:
Integra 94-95 DB7 harness + distributor+injectors all from integra DB7 non vtec
ECU from Integra DB7+Hondata S300 v3
1st step of my swap, but i want pre install all for a possible Vtec Head from Civic 6th gen B16A1/2 and those vtec connections.
Recommendations, ideas please
something more i need
i am planning to do this SWAP on Integra DA9 1991 LS Coupe
OEM engine B18A1
the swap idea
B20 block oem internals+B18A1 head
B18B oem intake manifold fron integra DB7
Conversion OBD0 to OBD1:
Integra 94-95 DB7 harness + distributor+injectors all from integra DB7 non vtec
ECU from Integra DB7+Hondata S300 v3
1st step of my swap, but i want pre install all for a possible Vtec Head from Civic 6th gen B16A1/2 and those vtec connections.
Recommendations, ideas please
something more i need
Last edited by alexsan; 07-11-2017 at 08:33 AM.
Thread
Thread Starter
Forum
Replies
Last Post