D16y7 to b16a2 need help wiring
08-19-2014, 01:35 PM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2014
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
D16y7 to b16a2 need help wiring
Just put a b16a2 into my 96 ek coupe 5 speed.I used the same harness,the engine starts but lopes in idle at around 1500rpm.
AND will not rev at all ,only idles!
Now my question is HOW do I get it to run good cuz it was my dd.Has obd1 chipped p28 ecu with obd2a-obd1 step/jumper harness.I NEED HELP ON THE IACV 3 plug to 2 plug conversion!also need help with vtec wiring,and everything else WIRING WISE FOR THIS SWAP.please help,again car runs but will not rev,
Running obd2 distributor,
AND will not rev at all ,only idles!
Now my question is HOW do I get it to run good cuz it was my dd.Has obd1 chipped p28 ecu with obd2a-obd1 step/jumper harness.I NEED HELP ON THE IACV 3 plug to 2 plug conversion!also need help with vtec wiring,and everything else WIRING WISE FOR THIS SWAP.please help,again car runs but will not rev,
Running obd2 distributor,
Thread
Thread Starter
Forum
Replies
Last Post
cftb16600
Honda Civic / Del Sol (1992 - 2000)
1
04-14-2009 06:32 AM