D16Y5 head on Z6 block swap
#1
D16Y5 head on Z6 block swap
I did an engine swap for my high school senior project and I started it for the first time yesterday. I don't think it sounds right but I don't have a point of reference to know, so some help would be great.
It's a D16Z6 block with a Y5 head and I used a stock P06 ecu to start it to see if it ran. The ecu threw codes 10, 14, and 41 which is IAT, IACV and o2 sensor. Here's a video of it running. Any input would be appreciated. I don't have the correct throttle cable bracket so I don't have that adjusted properly yet.
http://youtu.be/WATmTEVzTK8
It's a D16Z6 block with a Y5 head and I used a stock P06 ecu to start it to see if it ran. The ecu threw codes 10, 14, and 41 which is IAT, IACV and o2 sensor. Here's a video of it running. Any input would be appreciated. I don't have the correct throttle cable bracket so I don't have that adjusted properly yet.
http://youtu.be/WATmTEVzTK8
Last edited by Lemonhead03; 10-18-2014 at 08:47 AM. Reason: Formatting
Thread
Thread Starter
Forum
Replies
Last Post
BUB89
Honda Civic / Del Sol (1992 - 2000)
11
09-12-2011 10:49 AM
Ass_Clown
Honda Civic / Del Sol (1992 - 2000)
3
09-15-2002 11:45 AM