d16a1 pistons into d16z6
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2005
Location: Omaha, NE, United States
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
d16a1 pistons into d16z6
hi guys, i've searched the faq's but cant find much info on this, all i found was it would raise compression to 12.1 and just the results, but not much on whats required to make it work and such.
the questions i have is, would the stock rods work or is it better to do the rods with the pistons?
also can i put them in by myself or does a machine shop have to put them in...
would this be ok for daily driving?
also, what else should be refreshed in the block while i have it all dissembled (the block i have is in perfect working condition, nothing is wrong with it)
thanks for any input?
the questions i have is, would the stock rods work or is it better to do the rods with the pistons?
also can i put them in by myself or does a machine shop have to put them in...
would this be ok for daily driving?
also, what else should be refreshed in the block while i have it all dissembled (the block i have is in perfect working condition, nothing is wrong with it)
thanks for any input?
Thread
Thread Starter
Forum
Replies
Last Post
UniqueX707
Honda Civic / Del Sol (1992 - 2000)
1
10-28-2012 09:50 AM
yz125rider21
Honda CRX / EF Civic (1988 - 1991)
3
12-14-2005 08:35 PM