which D16 model have intermediate shafts?
#1
Junior Member
Thread Starter
Join Date: Oct 2001
Location: Milpitas, CA, US
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
which D16 model have intermediate shafts?
I couldn't find anything useful in the search.... Which D series models come with intermediate shafts?
What needs to be done to convert a non-intermediate shaft D16 to an equal length set-up?
What needs to be done to convert a non-intermediate shaft D16 to an equal length set-up?
#2
Honda-Tech Member
Join Date: Jul 2002
Location: Tx, USA
Posts: 832
Likes: 0
Received 0 Likes
on
0 Posts
Re: which D16 model have intermediate shafts? (jesselee)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">What needs to be done to convert a non-intermediate shaft D16 to an equal length set-up?</TD></TR></TABLE>
seems like the 86-88 integra was the only D series that had the intermediate shaft....
I'm not even sure if you can do that....
Mark
seems like the 86-88 integra was the only D series that had the intermediate shaft....
I'm not even sure if you can do that....
Mark
#3
Honda-Tech Member
Re: which D16 model have intermediate shafts? (jesselee)
I believe the ZC and 1st Gen Integra motors had Intermediate shafts. I didn't think you could use them on any other D-series motor though, could be wrong but I don't think there is a place to bolt it up.
EDIT: Blast! I'm late!
EDIT: Blast! I'm late!
Thread
Thread Starter
Forum
Replies
Last Post
D21X
Honda Civic / Del Sol (1992 - 2000)
2
09-23-2004 10:31 AM