sparq

What kind of times should I be looking at for a stock CRV swap (GSR tranny) and also a CRVTEC again with the GSR tranny. 1992 CX hatch + me = 2250lbs

Thanks

sparq

Thanks for all your help guys.

yaya

i would GUESS very low 13's crvetc

jg

my b20vtec in my hatch, so far, has run 12.8 @ 109-110 w/ a 1.9-2.0 60' time on 22x8x15 slicks. Rollerwaves and dc 4-2-1 gsr header(yes, the puny one) , and a Apexi dunk exhaust. Made 206hp and 153tq at that time. Car weighs roughly 2200 w/ me in it. It's quite a bit more powerfull now, but haven't been to the strip yet.
Oh- I still had the power steering in it too.


[Modified by jg, 9:24 AM 8/19/2002]

jinxproof99

with that weight, hsp/tq, and 109mph, you should be running 12.3-12.1 you should also be cutting high 1.60's to 1.75 60 fts.


[Modified by jinxproof99, 12:26 PM 8/19/2002]

Apex i ITR

Depends on track, conditions, driver etc.

jg

problem is, most likely, the driver here. Crappy track also. What rpm do most of you guys launch?

daver

about 1500rpms and i still get a spinning 2.5 60' haha. guess i need slicks...

d