Chevy big block/ls series in a integra
10-22-2011, 06:29 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2005
Location: lethbridge, ab, canada
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Chevy big block/ls series in a integra
I know the crx with the ls1 has been done but has anyone done a big block or ls1 ina integra?I know with enought time and money anything can be done but i was curious if it has been done?cost and length of time.
10-22-2011, 06:36 AM
#3
Honda-Tech Member
Join Date: Sep 2011
Location: Columbus, OH
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Re: Chevy big block/ls series in a integra
oh, wow! look at that! first thing that came up in google was this:
http://www.youtube.com/watch?v=uMdUo43-qu0
USE THE SEARCH FUNCTIONS NOOB!
http://www.youtube.com/watch?v=uMdUo43-qu0
USE THE SEARCH FUNCTIONS NOOB!
10-22-2011, 07:41 AM
#5
Honda-Tech Member
Thread Starter
Join Date: Oct 2005
Location: lethbridge, ab, canada
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Re: Chevy big block/ls series in a integra
Yes, i did a search and have seen that thanks.but i am looking for a thread or write up about it not just the car complete,sorry i should of been more specific.Whoops i was specific when i asked for cost and lengh of time.More than just a dude at a gas station but thanks.
Last edited by downtime1; 10-22-2011 at 07:59 AM.
10-22-2011, 12:04 PM
#6
Honda-Tech Member
Join Date: Sep 2011
Location: Columbus, OH
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Re: Chevy big block/ls series in a integra
well no duh. but use google and i'm sure it'll help you more. i'm sure whoever did that build isn't sitting around waiting for other people to ask him questions.
10-22-2011, 04:21 PM
#7
Honda-Tech Member
Join Date: Nov 2008
Location: Plainfield, CT
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: Chevy big block/ls series in a integra
oh, wow! look at that! first thing that came up in google was this:
http://www.youtube.com/watch?v=uMdUo43-qu0
USE THE SEARCH FUNCTIONS NOOB!
http://www.youtube.com/watch?v=uMdUo43-qu0
USE THE SEARCH FUNCTIONS NOOB!
Trending Topics
10-22-2011, 04:27 PM
#8
Honda-Tech Member
Thread Starter
Join Date: Oct 2005
Location: lethbridge, ab, canada
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Re: Chevy big block/ls series in a integra
Thank you.And this is a forum for exchanging ideas and information .None of the rest of you have had anything of any value to offer.Lol i have been on here since 2005 as my sig says,but i can tell from your responses and limited info reading and understanding are a challenge for you.Can anyone else chime in here?
10-22-2011, 04:45 PM
#9
Honda-Tech Member
Join Date: Dec 2010
Location: Washington
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Re: Chevy big block/ls series in a integra
The only big block Integra's I have seen are the "Blown 454 Integra" that's on Youtube, I tried searching and found no information on it whatsoever. The other one I have seen is Integra body on the Mustang chassis, it's not quite the same- but it is still cool and unique in the end. There is a whole write-up on the Mustegra somewhere. I MIGHT have read it on Honda-Tech, I don't get on here much. If I recall his name was Kimo?
Cost and time all depends on the individual doing it, their skills, ect.. I know the Mustang-Integra was quite time consuming, lots of work to cut a body off an Integra and swap it onto a Mustang chassis. If you're a fabricator then the cost shouldn't be bad, if you're paying somebody to build motor mounts, brace the chassis, set the motor in, ect.. it will add up fast.
Hope that helps,
Goodluck.
Cost and time all depends on the individual doing it, their skills, ect.. I know the Mustang-Integra was quite time consuming, lots of work to cut a body off an Integra and swap it onto a Mustang chassis. If you're a fabricator then the cost shouldn't be bad, if you're paying somebody to build motor mounts, brace the chassis, set the motor in, ect.. it will add up fast.
Hope that helps,
Goodluck.
10-23-2011, 05:03 AM
#10
I'm really 2slow
Re: Chevy big block/ls series in a integra
Here you go. Don't say this doesn't help now.
https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/corvette-powered-ls1-civic-h-b-my-project-i-thought-i-would-share-2004368/
https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/corvette-powered-ls1-civic-h-b-my-project-i-thought-i-would-share-2004368/
Thread
Thread Starter
Forum
Replies
Last Post
