Car won't start...No voltage at ECU
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2002
Location: Ohio
Posts: 955
Likes: 0
Received 0 Likes
on
0 Posts
Car won't start...No voltage at ECU
Car: 99 CX Hatch
Motor: 00 USDM H22a4
I installed my Zeitronix WB02 sensor today and soldered all the ECU connections. I went to start my car and nothing happens. Won't even turn over. I have power getting to the accessories. There is no voltage when the key is in the ON position at the main power pin at the ECU. What fuse controlls this connection?
I have checked all the fuses under the hood and all are fine. I looked over the chart for the interior box and none would make sense to cause this problem.
Motor: 00 USDM H22a4
I installed my Zeitronix WB02 sensor today and soldered all the ECU connections. I went to start my car and nothing happens. Won't even turn over. I have power getting to the accessories. There is no voltage when the key is in the ON position at the main power pin at the ECU. What fuse controlls this connection?
I have checked all the fuses under the hood and all are fine. I looked over the chart for the interior box and none would make sense to cause this problem.
Thread
Thread Starter
Forum
Replies
Last Post
honda_joe
Honda Civic / Del Sol (1992 - 2000)
8
03-17-2005 03:55 PM