BrowNKiD

Hello,

Back in 2008 I built and H2B EG using a evolution H2B kit and was plagued with nothing but problems.

Initial Build - https://honda-tech.com/forums/hybrid-engine-swaps-18/my-h2b-build-brown-kids-h2r-2364973/
Problems - https://honda-tech.com/forums/drag-racing-36/h2b-shifting-problems-2387935/

Well with help from a lot of people I finally figured out the issue and it was correct last year and this was the result.

https://honda-tech.com/forums/hybrid-engine-swaps-18/brownkids-h2b-2837388/

Now my plan always was to turbo the car. Why you may ask? There nothing like the feel of boost!

Over the winter I've been collecting a lot of parts. Here is an over view of the build.

Engine Stock
Type S Cam Shafts
New Honda Headgasket 12251-P13-004
ARP Headstuds 208-4304
Golden Eagle Intake Manifold
Thermal Intake Gasket
Edelbrock 75mm TB 3812
Edelbrock Adapter Plate 38122
Kaizen Speed Oil Pan
Explicit speed Alternator re locator

Fuel
Aeromotive A1000 Fuel Pump 11101
Aeromotive 100 Micron Pre Pump Filter 12304
Aeromotive 10 Micron Post Pump Filter 12301
Aeromotive Regulator 13101
-10 Feed
-8 Return
Sump Gas Tank
Golden Eagle Fuel Rail

Electronics
AEM EMS V2 30-6040
AEM EPM 30-3255
AEM Pencil Coils 30-2851-4PK
AEM Twin Fire 30-2821
AEM Uego 30-4100
AEM Boost Guage 30-4406

Turbo Setup
Precision 6765
Precision 46mm Waste gate
Precision 24x12x3.5 (I think can't remember)
CenterLine Motorsports End Tanks
CenterLine Motorsports Forward Facing Manifold
CenterLine Motorsports Piping

Exterior
BYS Carbon Spoiler (Girlfriend purchase)
CF Hood
JDM EG6 Lip
JDM EG6 2pc LED Spoiler (Not installed)
JDM EG6 Fog Lights (Not installed)
JDM EG6 Clear Side Markers
JDM EG6 Corners
JDM EG6 Antenna Block Off
JDM EG6 LSD Sticker
JDM EG6 Parking Pole (Not installed)
JDM EG6 Headlamps
Red/White Tails
EK Side Skirts
OEM Mud Flaps

Interior:

JDM DC2 Recaro's Black w/Red stitching (Girlfriend purchase)
JDM DC2 Black w/Red stitching rear seats
JDM EG6 Amber Clock
JDM EG6 Center Console
JDM EG6 Long Arm Rest
JDM EG6 Deck Tray
JDM EG6 Floor Mats
JDM EG6 Fuse Box Cover
JDM EG6 Road Flare
JDM EG6 Cluster
JDM EG6 Fog Light Switch
JDM EG6 Rear Defrost Switch
JDM EG6 Front Tweaters
JDM EG6 Horn Buttom
JDM EG6 Trash Can
JDM ITR Titanium Shift ****
JDM ITR Key
OEM Rear Speaker Kit
Si Door Pannels
Momo wheel
Pioneer in-dash

Suspension
JDM ITR 1" Brake Booster And Master Cylinder
JDM ITR Clutch Master Cylinder
JDM ITR Strut Tower Bar
Password JDM Rear Upper Tie Bar
PIC 14k 18k Coil-Overs
92-93 Civic SI 4 wheel disk
EBC Rotors all around
Hawk HP Plus front pads
Hawk HPS rear pads
Mugen MF10L
Enkei RPF01
ITR 5 Bolt (Not installed)
NSX Calipers (Not installed)
JDM CTR Rims/RSX-S Rims (Not installed)
AP1 s2000 Rims (Not installed)

Enough Talking. Time for some pictures.

I'll start with some of my fav pics over the years.





Now for some build pics

New oil pan w/ turbo and catch can return.



New Pick Up



I know its hard to see in the picture. But this is how much oil was remaining in my oil pan AFTER I drained everything I could.


New Pick up (I know I should have took pics of the old one but this was during the winter and its mad cold)



My Christmas Present


Cleaning up driver side headlight harness










Made the VERY difficult decision to go back to 4 bolt to fit 13"


Spindles Before


Sandblasted and primed


Painted



New Bearing New Ball joints New ARP extended Studs



Found a subframe brace lying around so I decided to turn it into my fuel pump bracket




New Injectors Came


AEM Pencil Coils



AEM Twin Fire



Golden Eagle Fuel Rail


New Lower Control Arm


Deutsch Connectors


Suspension



Fuel Rail


Fuel Pump Test


My Skunk2 Intake Manifold (which is now for sale)


I was forced to clean up my wiring harness. Not fun


Turbo Came 6765 Precision



Precision Core


Harness all layed out



Tial BOV


Precision Waste Gate




Partially back together


Off to Centerline


Test Fitting everything


Updates at of 06/20/11

SL0WEGG

Nice work Can't wait to see outcome. So you're just gonna wait till it blows up to build the motor? lol

ef9_lover

iTrader: (1)

you wont believe where i first saw your build bro. YOUTUBE hahaha wen i was building mine i was searching youtube i saw ur whole build.
nice work keep it up.

JayWest

looking good man
good luck with it

deucedeuceEK

Subcribed!

rexracer626

siick i want that oil pan!!!

BrowNKiD

Picked These up yesterday


Along with some new brakes

SL0WEGG

Because the mf10L's weren't enough? lol Good stuff

Smokinsax

hahaha....my thoughts exactly

what a great project. Looks like you put nothing but great quality parts and labour into your car.

BrowNKiD

I wanna see how much power we can make on the stock motor.

Lol thats really cool. Never knew that many people saw that video.

Give Kaizen speed a call.

LOL these are for daily (225/50r15 bfg) I cant be mounting and dismounting tires on mf10ls all the time.

DRI13

Your selling the skunk intake?

2fast4u831

nice!!

teefunk01

looks good post this up on h22squad.com to!

BrowNKiD

RotiEatter

iTrader: (1)

Damn .... Now I know what money looks like. :-p sick man, sick.

I was in tdot (Brampton) couple weeks ago.

BrowNKiD

SL0WEGG

Must be nice

H2BJON

Looks+Race

YZFR6

She's coming along :-) should be one of the fastest street cars in Toronto if not the fastest!

MR.johnson

very cool

Tkay08

Hey text me I'm real interested in your skunkpro2 manifold with blk golden rail? 5869352270

project93hatch

i like where this is going! quality parts