wilkerson05

i wanted to put a b20 in my 94 hatchback cx but i dont know what all i need...any help would be greatly appreciated...thanx

evilhatch2.0

you'll need a complete b-series swap

NVturbo

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by evilhatch2.0 &raquo;</TD></TR><TR><TD CLASS="quote">you'll need a complete b-series swap </TD></TR></TABLE>You mean....
- Complete B20 head/block
- DX,VX,LX,or EX (Civic) or any Interga engine wire harness (OBD I)
- LS intake manifold (OBD I)
- LS 5spd tranny w/ flywheel
- P75 ECU (OBD I)
- LS axles including intermediate shaft
- LS mounts (OBD I) ~ pass, driver, rear, tranny bracket, AC bracket
- LS throttle cable
- LS alternator & distributor (OBD I) or OBD II alternator/distributor plugs

URBAN TANK

If you oder an ob2 motor get an ob2 wiring harness trust me. Been there done that