b18cR crx problem
06-28-2004, 05:55 PM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2003
Location: kzoo, small town mi, usa
Posts: 2,830
Likes: 0
Received 0 Likes
on
0 Posts
b18cR crx problem
I just got done wiring my car, went to start it up, and it runs and blah blah blah. The car revs very slowly, and the revs drop slowly as well. I used a chipped p28 hondata s100 system. With the same basemap off of my buddy's car, cuz they are pretty much identical. I am not quite sure what to look for. Do you guys think the timing is off???? I havent checked it with a timing gun yet. I was too burnt out from work, and then straight to working on my car to do it. Any ideas guys??
06-28-2004, 05:56 PM
#2
Honda-Tech Member
Thread Starter
Join Date: May 2003
Location: kzoo, small town mi, usa
Posts: 2,830
Likes: 0
Received 0 Likes
on
0 Posts
06-28-2004, 06:02 PM
#3
Honda-Tech Member
Thread Starter
Join Date: May 2003
Location: kzoo, small town mi, usa
Posts: 2,830
Likes: 0
Received 0 Likes
on
0 Posts
Car is throwing code 41, and 20. Wich is o2 sensor, and something else. I think i have the grounds backwards on the o2 sensor, but i still dont think it would run like that just because of the o2 sensor.
Thread
Thread Starter
Forum
Replies
Last Post
ActiveAero
Acura Integra Type-R
11
01-24-2002 01:19 PM