b18c into 99 ek... still can't figure this out
01-04-2004, 09:29 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2002
Location: Atlanta, GA
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
b18c into 99 ek... still can't figure this out
okay, guys, i only have a few more problems to solve before the b18c (gsr) will be ready to go..... my first is, where the hell does the iab wire go to? i added a single wire at the b16 position on my wiring harness, but i have no idea which plug it needs to run to.
my other question is this: on the large grey plug next to the distributor there are two large circle plugs that have two large wires going into them. the gsr harness has a blue wire on the right side, if i recall correctly... my si wiring harness does not have any wire at this position..... what is that wire for?
sorry for all the questions.... i ordered a helms manual for the gsr but i don't think it's going to get here before i need the swap done..... thus, i'm counting on h-t for guidance. thanks in advance.
my other question is this: on the large grey plug next to the distributor there are two large circle plugs that have two large wires going into them. the gsr harness has a blue wire on the right side, if i recall correctly... my si wiring harness does not have any wire at this position..... what is that wire for?
sorry for all the questions.... i ordered a helms manual for the gsr but i don't think it's going to get here before i need the swap done..... thus, i'm counting on h-t for guidance. thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post
BukakkEK9
Hybrid / Engine Swaps
1
10-15-2006 01:01 PM
bogus_ek
Hybrid / Engine Swaps
4
03-27-2005 08:10 AM
