B18a motor with PR3 Cam?
#1
Member
Thread Starter
Join Date: Dec 2002
Location: Midwest, USA
Posts: 2,497
Likes: 0
Received 0 Likes
on
0 Posts
B18a motor with PR3 Cam?
i got my motor and it has a pr3 (b16) cam. Is this good or bad? the guy before says it kept up with a Civic Si and it had an auto tranny in it too!!! Anyways should i change it to a ls cam?
#3
Honda-Tech Member
iTrader: (3)
Join Date: Feb 2002
Location: MN
Posts: 12,561
Likes: 0
Received 0 Likes
on
0 Posts
Re: B18a motor with PR3 Cam? (ProJectCvic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ProJectCvic »</TD></TR><TR><TD CLASS="quote">i got my motor and it has a pr3 (b16) cam. Is this good or bad? the guy before says it kept up with a Civic Si and it had an auto tranny in it too!!! Anyways should i change it to a ls cam? </TD></TR></TABLE>
WTF..... your kidding me right?
you cannot use a dohc vtec cam in a Dohc NON-vtec motor! your motor must run like *** right now. That dude is giving you BS and I pray for you sake that you don't take him seriously. If any fool told be that I would point my finger at him, laugh, and walk away from the deal, because the motors probably fucked up already.
hahah the funny thing is that it's a automatic...... <U>keeping up with 99si... (rights)</U>
WTF..... your kidding me right?
you cannot use a dohc vtec cam in a Dohc NON-vtec motor! your motor must run like *** right now. That dude is giving you BS and I pray for you sake that you don't take him seriously. If any fool told be that I would point my finger at him, laugh, and walk away from the deal, because the motors probably fucked up already.
hahah the funny thing is that it's a automatic...... <U>keeping up with 99si... (rights)</U>
#4
Honda-Tech Member
Re: B18a motor with PR3 Cam? (ProJectCvic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ProJectCvic »</TD></TR><TR><TD CLASS="quote">i got my motor and it has a pr3 (b16) cam. Is this good or bad? the guy before says it kept up with a Civic Si and it had an auto tranny in it too!!! Anyways should i change it to a ls cam? </TD></TR></TABLE>
can you show us proof of this w/pictures maybe ?
can you show us proof of this w/pictures maybe ?
#5
Senior Member
Re: B18a motor with PR3 Cam? (ProJectCvic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ProJectCvic »</TD></TR><TR><TD CLASS="quote">i got my motor and it has a pr3 (b16) cam. Is this good or bad? the guy before says it kept up with a Civic Si and it had an auto tranny in it too!!! Anyways should i change it to a ls cam? </TD></TR></TABLE>
wtf? proof please.
wtf? proof please.
#7
Member
Thread Starter
Join Date: Dec 2002
Location: Midwest, USA
Posts: 2,497
Likes: 0
Received 0 Likes
on
0 Posts
Re: B18a motor with PR3 Cam? (ProJectCvic)
But maybe i got you guy mix up...it it cam gears, NOT CAM. Sorry for the confusion .
imagestation is underconstruction...i'll try tomarrow. Meanwhile can any of you answer my concern about the pr3 cam gears in the ls motor? Is this goig to mess up my timing?
I was like you guys ( in disbelief) when the guy told me about the keeping up with the SI too...but, some people talk alot to sell ****.
Any input please
imagestation is underconstruction...i'll try tomarrow. Meanwhile can any of you answer my concern about the pr3 cam gears in the ls motor? Is this goig to mess up my timing?
I was like you guys ( in disbelief) when the guy told me about the keeping up with the SI too...but, some people talk alot to sell ****.
Any input please
Trending Topics
#8
Re: B18a motor with PR3 Cam? (ProJectCvic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ProJectCvic »</TD></TR><TR><TD CLASS="quote">Meanwhile can any of you answer my concern about the pr3 cam gears in the ls motor? Is this goig to mess up my timing? </TD></TR></TABLE>
Same ****, same amount of teeth. Infact, I have PR3 stock cam gears on my B18A motor.... they were cleaner (no rust) so when changing out my timing belt, I just threw those on. Didn't affect timing at all.
Same ****, same amount of teeth. Infact, I have PR3 stock cam gears on my B18A motor.... they were cleaner (no rust) so when changing out my timing belt, I just threw those on. Didn't affect timing at all.
#9
Member
Thread Starter
Join Date: Dec 2002
Location: Midwest, USA
Posts: 2,497
Likes: 0
Received 0 Likes
on
0 Posts
Re: B18a motor with PR3 Cam? (Newman)
here are the pics for those of you that wanted to see it. If it was like what newman say..it wouldn't have matter. Thanks man. You sure they are the sam?
Thread
Thread Starter
Forum
Replies
Last Post