B18A Auto -> 5th Gen
08-26-2003, 02:42 PM
#1
New User
Thread Starter
Join Date: Feb 2001
Location: Salt Lake City, UT
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
B18A Auto -> 5th Gen
Building a car for my dad, and I have a few questions about swapping a b-series with an automatic transmission into the EG chassis.
1) does anyone here have this setup?
2) One of the posts I found while searching said you have to cut into the frame to get the auto-tranny to fit. This sounds like BS to me, but is there any validity to this?
3) Is there an aftermarket torque converter I should look at for boosting(7-9psi)?
Modified by MoBlack at 2:18 PM 8/27/2003
1) does anyone here have this setup?
2) One of the posts I found while searching said you have to cut into the frame to get the auto-tranny to fit. This sounds like BS to me, but is there any validity to this?
3) Is there an aftermarket torque converter I should look at for boosting(7-9psi)?
Modified by MoBlack at 2:18 PM 8/27/2003
Thread
Thread Starter
Forum
Replies
Last Post
