Another compression ratio question( I know all you geeks can help me out)
#1
Honda-Tech Member
Thread Starter
Another compression ratio question( I know all you geeks can help me out)
Im building ls vtec. walls have an oval in them. So I am selling my pr3 pistons and gettin some .25 overbore ITRs. What kinda comp. will these yield with a b16 head. I know this is a common q, but I searched and couldn't find anything. I also searched the hyprd page, no luck. Thanks guys.
Waffles
Waffles
#2
Honda-Tech Member
Join Date: Jan 2000
Location: phx, az, USA
Posts: 888
Likes: 0
Received 0 Likes
on
0 Posts
Re: Another compression ratio question( I know all you geeks can help me out) (WAFFLES)
here use this to help you out figuring how to get that compression ratio.
caution math involved.
http://www.pelicanparts.com/914/tech...ompression.xls
caution math involved.
http://www.pelicanparts.com/914/tech...ompression.xls
#3
Honda-Tech Member
Re: Another compression ratio question( I know all you geeks can help me out) (WAFFLES)
I believe it's around in the 11.0 range..
You sure you wanna go LS/VTEC ???
your gonna build up that motor and it's not gonna last for very long ...
you will be bummed in the long run and I know you've heard about LS.Vtec's not being reliable/ lasting very long.
you'd have more fun with a B16A block w/GSR head
You sure you wanna go LS/VTEC ???
your gonna build up that motor and it's not gonna last for very long ...
you will be bummed in the long run and I know you've heard about LS.Vtec's not being reliable/ lasting very long.
you'd have more fun with a B16A block w/GSR head
#4
Honda-Tech Member
Thread Starter
Re: Another compression ratio question( I know all you geeks can help me out) (superflea)
Math's no problem, I'm in Calculus I. hahahaha... Thanks though man. I'ld rather have a formula than someone's "estimate".
Thread
Thread Starter
Forum
Replies
Last Post
crxowner
All Motor / Naturally Aspirated
9
03-12-2006 11:21 PM