AMP Male pin Part # for OBD2a>OBD1 harness
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2004
Location: SoCal, USA
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
AMP Male pin Part # for OBD2a>OBD1 harness
Just got my hands on a OBD2a female plug side (from dismanteled OBD2a ECU) and male OBD1 plugs (from junk yard) to make a OBD2a>OBD1 conversion harness. Now all I need are the male PINS to crimp them on the OBD1 plugs and put them together. Does anyone have the part numbers of the AMP Male pins or something similar to them?
Modified by duofilm at 4:46 AM 10/7/2007
Modified by duofilm at 4:46 AM 10/7/2007
#2
Honda-Tech Member
Re: AMP Male pin Part # for OBD2a>OBD1 harness (duofilm)
Good luck homie. The pins come in standard mins of around 5k pieces on a spool. I can sell you some pre crimped pins on wires. Let me know.
Jason
http://www.JKobdconversionharness.com
Jason
http://www.JKobdconversionharness.com
#3
Honda-Tech Member
Thread Starter
Join Date: Nov 2004
Location: SoCal, USA
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Re: AMP Male pin Part # for OBD2a>OBD1 harness (Blown90hatcH)
LOL I thought no one would ever post something. I kinda figured the part number was some what of an industry secret. I'm probably gonna have to do some measuring and findout what specs are needed for tyco. Unless you can email me the part number haha. If anything, how much for two sets of those pre-crimped male pins am I lookin at?
Thread
Thread Starter
Forum
Replies
Last Post
Ganja_Green_559
Honda CRX / EF Civic (1988 - 1991)
4
09-11-2011 01:29 AM