All that is going to be need for the 2nd gen b16 into 2nd gen teg
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2002
Location: Sherwood, arkansas
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
All that is going to be need for the 2nd gen b16 into 2nd gen teg
Okay with all of the BS out of the way what is going to be different and I am going to have to purchase besides the upper radiator hose , is the flywheel off of my b18a1 going to bolt right up to the b16 (i have heard it will) but want to know for sure, next what am I going to have to do about the throttle cable is it going to have to be modified, next any other hoses cables,, oh yea someone give me the skinny I have a OBD-1 PR3 but what I need is the pinout diagram which i still haven't been able to find for the Obd-1 pr3 have found it for the pr4 and the non-obd pr3 but that has two o2 sensors someone please enlighten me I am going to be doing the swap over this three day weekend starting tomorrow @ lunch and would like to know what I am missing...Thanks for the info if anyone could give me some hard info...
I would really like some feed back i have done abit of research but its the info is of the type where you take like the 3 out of five that are the same...
[Modified by tegrevboy, 5:27 AM 1/17/2003]
I would really like some feed back i have done abit of research but its the info is of the type where you take like the 3 out of five that are the same...
[Modified by tegrevboy, 5:27 AM 1/17/2003]
Thread
Thread Starter
Forum
Replies
Last Post
ANGELIQUE
Honda Civic / Del Sol (1992 - 2000)
4
09-16-2005 07:46 AM