stokeless

we bought a complete 2000 integra LS swap to be put in a 2000 ek. the ecu that came with the swap does not plug up to the plugs in the ek. i thought this was plug and play.

so we use the harness from the ek and the dist. does not plug up... what do i need???
how can i tell if this a 2000 LS swap? the block states B18B. i need input, Please.

help!!!

veggiemaster

there are 2 different obd 2's. OBD2A and OBD2B, that is probably your problem. also, Are you sure that your LS swap is an OBD2 swap?

stokeless

i understand there is a different with obd2a and b but from what i understand, a 2000 swap from an integra should plug up with an 2000 ek hatch.

btw i'm positive this is an obd2 swap.

tell me if i'm wrong...

i think they might of gave me the wrong ecu.

JDMFreak

OBD Generations


OBD0




Civic 1988-1991
Integra 1988-1991
Prelude 1988-1991


OBD1




Civic 1992-1995
Integra 1992-1995
Prelude 1992-1995
Engines JDM and USDM B16A, B18C, H22A, D16Z6, etc...


OBD2a




Civic 1996-1998
Integra 1996-1999
Prelude 1996-2001
Engines JDM and USDM B16A, B18C, B18CR, B18C5, H22A, B20B, B20Z, D16Y8, D16Y7, etc...


OBD2b




Civic 1999-2000
Integra 2000-2001
Engines JDM and USDM B16A, B18C, B18CR, B18C5, H22A, B20B, B20Z, D16Y8, D16Y7, etc...

courtesy of: XXXX://www.frogenginecontrols.com/OBDGen.html


Modified by JDMFreak at 4:34 PM 9/19/2005