***Whats needed for power steering when doing a swap?***
10-20-2002, 03:32 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: ATL, GA, USA
Posts: 2,944
Likes: 0
Received 0 Likes
on
0 Posts
***Whats needed for power steering when doing a swap?***
Got a simple question. A dx hatch doesn't have power steering, when you swap in a b18c what parts are needed for the power steering. Thanks.
10-20-2002, 05:47 PM
#2
Honda-Tech Member
Join Date: Jun 2001
Posts: 2,104
Likes: 0
Received 0 Likes
on
0 Posts
Re: ***Whats needed for power steering when doing a swap?*** (georgiajdm)
power steering rack, lines, pump, bracket, and belt
I'd just leave it out personally, I swapped my Power steering rack in favor of a manual one.
I'd just leave it out personally, I swapped my Power steering rack in favor of a manual one.
10-20-2002, 07:47 PM
#3
Honda-Tech Member
Re: ***Whats needed for power steering when doing a swap?*** (madtownhonda)
Don't forget rear crossmember, it's different for the P/S cars. The P/S rack will not bolt into the non P/S crossmember.
brian g
brian g
Thread
Thread Starter
Forum
Replies
Last Post
CTR_B
Honda CRX / EF Civic (1988 - 1991)
8
08-31-2008 02:05 PM