|
Official S2000 For Sale Thread V.2.0 ***OLD***
Since the other one got to past 100 pages and became a bit hard to weed through it, this is the new FS thread. Post your stuff in here.
|
Old For Sale Add's (You cannot post here)
Sold.
|
FS: AP1 short block and Pistons/Rods
I'm located in Socal 91790
Will ship on everything + paypal fees if pay through paypal. please email me if you're interested. tamtanium@yahoo.com ------------------------------------------ AP1 short block (doesn't come with crank, pistons, etc..) It's just a bare block. #1 cylinder has a very slight score on it. It's not enough to catch a finger nail and I got it professionally honed last week. You can either buy the block as is or great for bore and sleeve for that great FI setup. The block is in great shape. I'm asking $500 + shipping. I also have 3 AP1 pistons/rods. They're all in good shape. Asking $50 each + shipping. https://i5.photobucket.com/albums/y1...m/IMG_3160.jpg https://i5.photobucket.com/albums/y1...m/IMG_3161.jpg https://i5.photobucket.com/albums/y1...m/IMG_3165.jpg https://i5.photobucket.com/albums/y1...m/IMG_3174.jpg https://i5.photobucket.com/albums/y1...m/IMG_3181.jpg Will trade for the following items: - Aftermarket flywheel - hmmm..and anything else you may have https://honda-tech.com/forums/images/smilies/emthup.gif please email me if you're interested. tamtanium@yahoo.com - Tam |
fs: blue samco hoses for s2k..never been used asking 100
fs: project mu brake pads..brand new in the box..asking 150 |
I waited 3 months for these wheels, only to have them on the car for less than 400 miles. Here is your chance. No waiting. Instant status with these. Aggressive offsets. Work Emotion XD9's. 17x8.5 et44 with Falken ST115 215/45-17, 17x9.5 et42 with Falken ST115 245/40-17. Yes, the tires are stretched. Yes, you will rub if you are lowered on stock fenders. Only 2 blemishes. One small rock chip on one of the rear wheels. And somebody tried to peel the Emotion sticker from one of the front wheels. Minimal damage that has to be pointed out to be seen. Look at the aggressive stance they give you car. $1850 plus shipping with out gold lug nuts, $1900 plus shipping with gold lug nuts.
https://i19.photobucket.com/albums/b...20S2000/04.jpg https://i19.photobucket.com/albums/b...-45-17un85.jpg https://i19.photobucket.com/albums/b...-40-17on95.jpg https://i19.photobucket.com/albums/b...Village/06.jpg https://i19.photobucket.com/albums/b...Village/07.jpg |
Re: (lamsv)
anyone know anyone looking for an s2k? clean title w/ 95k miles. trying to sell it within a week or 2 to buy something else (surprise). i want 10500$ in my pocket, and DMV fees / repairs needed on you. (total prob like 12k) https://honda-tech.com/forums/images/smilies/emthup.gif
|
Re: Re: (Dynasty21)
H&R Coilovers
400 miles on them OEM top hats not included. 850.00 https://i26.tinypic.com/264opax.jpg Free installation if you pay full asking price, in Muskego, WI |
AP2 headlights
Selling a set of mint condition AP2 headlights with no ballasts or bulbs, lights came out of a 06 with 12k on the clock lights are flawless and in brand new condition....
asking 400.00 for the pair, paypal accepted buyer pays shipping |
Re: Official S2000 For Sale Thread V. 2.0 (d98clturbo)
FS: ap2 oem silverstone rear spoiler (wing) 300 obo
|
**********s2000 ViS CarBon Fiber HooD************freSH**
s2000 ViS Xtreme GT carbon fiber hood
no scratches LikE New https://i59.photobucket.com/albums/g...706081728a.jpg https://i59.photobucket.com/albums/g...0706081728.jpg https://i59.photobucket.com/albums/g...706081727a.jpg https://i59.photobucket.com/albums/g...706081727c.jpg asking $400 https://honda-tech.com/forums/images/smilies/emthup.gif ObO also consider jdm trades .. i will take offers if good enough **MsRP $760 ** u can email me at dubcity0304@hotmail.com or reply let me kno. be4 it goes Modified by hguzman90 at 5:23 PM 7/6/2008 |
First item: Stock Ap1 Exhaust with both tips, in EXCELLENT condition. Can be off the car by next weekend (I have to get my new one fixed).
Price: 125 SHIPPED (including PP fees) or 50.00 picked up in Cincinnati Second Item: Stock AP1 Airbox w/ OEM Filter - This has ~22k miles on it, and I had it on the car until I got a CAI. Works great, and is also in EXCELLENT condition. https://i43.photobucket.com/albums/e...feet/s2k10.jpg Price: 80 SHIPPED (including PP fees) or 40.00 picked up in Cincinnati Third Item: Stock AP1 Springs - On the car for ~25k miles until I went with Espelir Springs. You know what they look like. Price: 80 SHIPPED (including PP fees) or 50.00 picked up in Cincinnati More items to come later. PM me, reply here, or email me at mgproudfit@cn.edu for a quick reply. Contact Info: Name: Matt Proudfit Location: Cincinnati, Ohio 45242 Phone: 513-604-6714 Email: See above Thanks! -Matt |
Re: (mattfeet)
FS: used OEM GPW hard top with all the hardware to install.
Top is in excellent condition. If you have an 06+ you will need a harness to connect the window defroster because this one is from a pre-06 and won't fit. I'll try to post pics soon, but IM me with your email if you want pics. Located in So.Cal. SFV area. Price: $2150 firm (that means FIRM). Lower offers will be ignored at this time. If interested please IM me as I am not subscribed to this S2K FS thread. |
Re: For Sale GOLD Work VS-XX (EF7)
AP1 OEM rear wing berlina black BNIB it never got used but it did get a tiny chip in it the size of a pen tip, pics below!!! asking price 400!
includes wing,instructions and template and of course the upgraded trunk springs https://honda-tech.com/forums/images/smilies/emthup.gif https://i45.photobucket.com/albums/f...S/IMG_0230.jpg part number https://i45.photobucket.com/albums/f...S/IMG_0231.jpg i never actually took it out of the box https://i45.photobucket.com/albums/f...S/IMG_0232.jpg other side https://i45.photobucket.com/albums/f...S/IMG_0233.jpg and a closeup pic of the little nick on the back left in comparison to the tip of a ball point pen Modified by A L I A S at 5:51 PM 7/7/2008 |
Re: Official S2000 For Sale Thread V. 2.0 (DO NOT MAKE ANY OTHER FS THREADS)! (papa5murf)
FS: BNIB OEM AP2 Lip - Silverstone
FS: BNIB OEM AP2 Lip - Berlina Black Comes will all hardware and gaskets. never mounted never seen the car. This is back when I wanted a Berlina, but didn't get it lol. As far as the silverstone, which I have now, I can't fund my AP2 conversion at this time so this needs to go asap https://honda-tech.com/forums/images/smilies/emthup.gif 360 shipped each + paypal fee's https://honda-tech.com/forums/images/smilies/emthup.gif |
Re:
Work VSXX
17x8, 17x9 +35 front/rear tires 205/45/17, 235/40/17 tires have less than 300 miles on them 1700 Plus Shipping https://i25.photobucket.com/albums/c...Picture028.jpg https://i25.photobucket.com/albums/c...Picture027.jpg https://i25.photobucket.com/albums/c...Picture026.jpg https://i25.photobucket.com/albums/c...Picture025.jpg |
Re: Bilstein PSS9 Coilovers
Bilstein PSS9 Coilovers 1240 Shipped
Less than 75 miles on the coils |
FS: J's Racing Hyper Single Clutch for S2000, new condition. Customer bought it and didnt like the feel of it.
Asking $1000shipped ($1350 brand new at Evasive Motorsports) IM me if interested. https://honda-tech.com/forums/images...es/emsmile.gif Modified by MooFX at 11:30 PM 7/9/2008 |
Seing if anyone has an interest in my somewhat cracked AP1 bumper, the cars at the body shop now getting a new one. If you want to see pics of how bad it is look at this thread.
https://honda-tech.com/zerothread?id=2325161 I don't think I would do shipping because I am pretty sure it would not be worth it for anyone. |
Re: (xhatchracerx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xhatchracerx »</TD></TR><TR><TD CLASS="quote">I have a pair of Fuzion ZRi tires in 245/45/16. They're brand new tires, I ordered them for my AP1, but traded it in before I got a chance to put them on. I am just looking to get back what I paid for the tires. Paid $200 shipped to my house and would like $170 for the tires. Located in Sacramento.
2x Fuzion ZRi tires in 245/45/16 ( BRAND NEW ) .....$170 for the pair http://is.rely.net/1-92-29998-l-1gbM...AmVuBW3hGg.gif https://i46.photobucket.com/albums/f...x/PC300005.jpg https://i46.photobucket.com/albums/f...x/PC300006.jpg https://i46.photobucket.com/albums/f...x/PC300007.jpg</TD></TR></TABLE> |
Re: Bilstein PSS9 Coilovers (MidwestAutoWorks)
I have a set of Koni yellow with ground control coilovers. 440 front 360 rear. The front struts havnt been installed yet and the rears are one the car. The rear struts have about 100 miles. i work 4 to midnight and did the rears one night and was planning on doing the fronts the next night but wound up getting to buisy. Im selling them because im trying to fund another k swap and could use the extra money. PM me if interested i will let them go for $850 plus shipping..
|
Cams
AP1 Cams--used
I bought these from a S2Ki.com member last year but never installed them. I have different plans for the car, so they are FS. Price: $100 SHIPPED to 48 states (subtract $10 for local pick up) Location: SFV So Cal Contact: IM If you want me to email you pics send me an IM with your email address (we-todd-did is down) |
Greddy e-manage boomslang plug and play. 105+shipping
Hell of a deal |
Re: Bilstein PSS9 Coilovers (Second2None)
Drivers side rail/bracket for side mount bucket seat.
$90 |
Re: Bilstein PSS9 Coilovers (S@nt0s)
Custom 4-Point Rollbar. Locally built (ridesrestored.com) All mounting hardware included. Harnesses bar. Diagonal bar needs painted. Asking $600 shipped
IM me. https://i251.photobucket.com/albums/...IMG_0701-1.jpg https://i251.photobucket.com/albums/...X/IMG_0702.jpg https://i251.photobucket.com/albums/...X/IMG_0703.jpg https://i251.photobucket.com/albums/...X/IMG_0676.jpg https://i251.photobucket.com/albums/...X/IMG_0675.jpg https://i251.photobucket.com/albums/...X/IMG_0667.jpg |
| All times are GMT -8. The time now is 02:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands