My 03 S2K Build
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Custom Turbo Widebody S2K cover of superstreet!
Current Setup
Exterior:
~Shine cf side diffusers
~Shine a-spec front bumper
~Shine CF lip
~Ap2 rear bumper molded/modified for single exhaust
~clear side markers
~Custom fabricated metal Widebody
~Ap2 headlights
Interior:
~ARC mirror polished titanium shift ****
~Aem A/F guage
~AEM boost guage
~Science of speed guage pillar
~Bride Zeta III seats
~Bride Rail Type-FO
~Cusco chromoly 5-point w/ Harness Bar
~Personal leather neo eagle steering wheel
~Worksbell quick release
~Worksbell short hub
~Takata Seat Belt Harness, 4-pt
~Takata Shoulder gel pad set
~Ap2 center console
~Ap2 radio door
~Alpine IDA-x305s
Engine/Drivetrain:
~CT- Engineering supercharger kit
~Cusco Oil catch tank
~Science of speed heat exchanger kit
~Tial Bov
~Invidia single cat back
~invidia test pipe
~5zigen header
~Custom machine 11 psi pulley
~1000cc ID injectors
~Aem v.2 Standalone EMS
~Hondata 3 bar map sensor
~ACT HDSS Clutch and pressure plate
~Powder coated valve cover candy blue
~Powder coated radiator stays candy blue
Suspension/Tires/Rims:
~275/35/18 Hankook ventus v12
~Volk TE37 18x10.5 +15 matte black
~VOlk flat center caps matte black
~ARK dtp coilovers
~T1r front bump steer kit
~Project kics 20mm spacers
~Black Rays extended Lugs
This is a little build thread Ive been keeping for a bit figured id share my experience, pix, and vids with the community.
Well to start out before i purchased the s2k my prior build was my 95 300zx after owning this car and recently selling it this past summer I feel like it was a good experience but I had some regretful things I did to the car and I feel like I've since changed my taste and gained some knowledge on where and where not to take my car if I need work done. So to start you guys off here's a few shots of my z
before and after pic
motor
and a few randoms
My weird self and my s in the back on the right lol
Back to the main car of this thread, In 2007 I took my friends spa yellow ap1 for a spin and fell in love with the car from then out i was completely sold and just had to have my hands on one so a few months later i purchased my 2003 silverstone s2000 bought the car Sept. 2007 with 4.8k miles on it and its currently at 26k miles. Took me quite a bit of time before i started modding this car. When i purchased it back in 2007 I swore up and down I was done with modifying cars, but modding as many of you no is an extremely hard addiction to break lol.
Sorry in advance some pictures are taking with a crappy camera some are taken with an iphone and some are taken with a still crappy but less crappier camera and some by other people's not so crappy cameras.
Day 1
A year goes by and I decided to tint it and take a few pix (this is where the money pit begins lol)
A few more months go by and I purchased dual invidia cat back my friend had it on his and i just loved the sound of it. (these pix are pretty crappy and my car was really dirty) Just figured I'd toss em in because i took a few pix with friends.
I actually do good for a long time and tell myself that I really dont need anymore parts. 2010 roll's around one of my friends decide to trade his 350z in and get an 05 ap2 he immediately was looking for exhaust so i sold him my duals and decided to go single and pick up the invidia tp as well.
had to stack a couple defoulers so i didn't get a CEL cause the tp with cel fix don't work.
I couldn't stand looking at the 2nd empty hole so i also decided to buy an exhaust cap
Picked up 3pc work's 18x8.5 in the front 18x9.5 on the rear
Took a trip to the closest dyno shop (Sorry for no digital printout they had never emailed it to me and i never really bothered for em again)
the s and my friends miata
!!!!!!!!!!!!!!!DYNO VID!!!!!
hard to tell but it put down 194whp and 131tq at this point all I had was the catback and tp
i switched to the ap2 center console and radio door
ct s/c
sos upgraded fmhe
some aem gauges
turbonetic godzilla bov (just to give you an idea how big it is)
act clutch and pp
And i decided to give ARK dt-p coilovers a shot and ended up really liking them
s2ki meet in freehold held by specops (awseome meet btw)
After i picked up my car and drove home, like an idiot i drove up a really steep hill with my wheels almost full lock turned and did this to my fender (yes they were rolled the hill was pretty steep)
My car was to low to pull into my driveway so it was out in the street until i raised it up some it met some wild turkeys while it was there (dono why the hell theres wild turkeys in my neighborhood never seen em before lol)
Exterior:
~Shine cf side diffusers
~Shine a-spec front bumper
~Shine CF lip
~Ap2 rear bumper molded/modified for single exhaust
~clear side markers
~Custom fabricated metal Widebody
~Ap2 headlights
Interior:
~ARC mirror polished titanium shift ****
~Aem A/F guage
~AEM boost guage
~Science of speed guage pillar
~Bride Zeta III seats
~Bride Rail Type-FO
~Cusco chromoly 5-point w/ Harness Bar
~Personal leather neo eagle steering wheel
~Worksbell quick release
~Worksbell short hub
~Takata Seat Belt Harness, 4-pt
~Takata Shoulder gel pad set
~Ap2 center console
~Ap2 radio door
~Alpine IDA-x305s
Engine/Drivetrain:
~CT- Engineering supercharger kit
~Cusco Oil catch tank
~Science of speed heat exchanger kit
~Tial Bov
~Invidia single cat back
~invidia test pipe
~5zigen header
~Custom machine 11 psi pulley
~1000cc ID injectors
~Aem v.2 Standalone EMS
~Hondata 3 bar map sensor
~ACT HDSS Clutch and pressure plate
~Powder coated valve cover candy blue
~Powder coated radiator stays candy blue
Suspension/Tires/Rims:
~275/35/18 Hankook ventus v12
~Volk TE37 18x10.5 +15 matte black
~VOlk flat center caps matte black
~ARK dtp coilovers
~T1r front bump steer kit
~Project kics 20mm spacers
~Black Rays extended Lugs
This is a little build thread Ive been keeping for a bit figured id share my experience, pix, and vids with the community.
Well to start out before i purchased the s2k my prior build was my 95 300zx after owning this car and recently selling it this past summer I feel like it was a good experience but I had some regretful things I did to the car and I feel like I've since changed my taste and gained some knowledge on where and where not to take my car if I need work done. So to start you guys off here's a few shots of my z
before and after pic
motor
and a few randoms
My weird self and my s in the back on the right lol
Back to the main car of this thread, In 2007 I took my friends spa yellow ap1 for a spin and fell in love with the car from then out i was completely sold and just had to have my hands on one so a few months later i purchased my 2003 silverstone s2000 bought the car Sept. 2007 with 4.8k miles on it and its currently at 26k miles. Took me quite a bit of time before i started modding this car. When i purchased it back in 2007 I swore up and down I was done with modifying cars, but modding as many of you no is an extremely hard addiction to break lol.
Sorry in advance some pictures are taking with a crappy camera some are taken with an iphone and some are taken with a still crappy but less crappier camera and some by other people's not so crappy cameras.
Day 1
A year goes by and I decided to tint it and take a few pix (this is where the money pit begins lol)
A few more months go by and I purchased dual invidia cat back my friend had it on his and i just loved the sound of it. (these pix are pretty crappy and my car was really dirty) Just figured I'd toss em in because i took a few pix with friends.
I actually do good for a long time and tell myself that I really dont need anymore parts. 2010 roll's around one of my friends decide to trade his 350z in and get an 05 ap2 he immediately was looking for exhaust so i sold him my duals and decided to go single and pick up the invidia tp as well.
had to stack a couple defoulers so i didn't get a CEL cause the tp with cel fix don't work.
I couldn't stand looking at the 2nd empty hole so i also decided to buy an exhaust cap
Picked up 3pc work's 18x8.5 in the front 18x9.5 on the rear
Took a trip to the closest dyno shop (Sorry for no digital printout they had never emailed it to me and i never really bothered for em again)
the s and my friends miata
!!!!!!!!!!!!!!!DYNO VID!!!!!
hard to tell but it put down 194whp and 131tq at this point all I had was the catback and tp
i switched to the ap2 center console and radio door
ct s/c
sos upgraded fmhe
some aem gauges
turbonetic godzilla bov (just to give you an idea how big it is)
act clutch and pp
And i decided to give ARK dt-p coilovers a shot and ended up really liking them
s2ki meet in freehold held by specops (awseome meet btw)
After i picked up my car and drove home, like an idiot i drove up a really steep hill with my wheels almost full lock turned and did this to my fender (yes they were rolled the hill was pretty steep)
My car was to low to pull into my driveway so it was out in the street until i raised it up some it met some wild turkeys while it was there (dono why the hell theres wild turkeys in my neighborhood never seen em before lol)
Last edited by Booztin; 07-03-2013 at 03:22 PM.
#2
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Re: My 03 S2K Build
Here's a few recent shots 9/9/10
I was playing the waiting game I ordered a TON! of parts and will be upping the boost and getting new dyno results my tune date was set for Oct. 6th
Some parts came in 9/10/10
aem v2
id1000's and hondata 3 bar map sensor
and i ordered some more parts later that day
9/20/10
got a large box today
My car will also be going in the body shop today
Ill have pix up later in the day.
back side sneek peek
get it back from the body shop thursday
9/23/10
Just got it back from the body shop , pretty terrible pic's off my phone but for now thats all i got.
I'll get more up tommorow maybe
9/24/10
sum new pix of it atleast cleaned lol , still drive way shots but better then the ones from last night.
got my new cusco catch can and installed it.
10/12/10
More to come
!!!!!!!NEW DYNO VID !!!!!!!!
http://www.youtube.com/watch?v=zlX6MPVjr-E
Had a boost leak and theres a big possibilty a lost hp with the 5zigen header over my stock tbh.
Im gonna be fixing the leak, putting stock header back on, getting a new filter cause this foam one sux, getting a new charge pipe elbow with a slightly larger diameter and no holes in it , and retuning it to see if i can pick up some more power.
The parts I ordered about a month ago are going to be arriving a bit later then expected so my next major update won't be for a few weeks.
More pix 10/16/10
11/3/10
After a well worth wait Gotuning.com hooked it up!!!!
Here's a few peaks before install
And yes although its not in the picture I did buy 2 seats
11/20/10
Here's my latest update
quick sneak peak waiting on a few parts so i wont have the car done for a bit.
cusco 5pt
Tial bov
More to come hoping that I'll get to have it back for a week or so before snow hits.
I was playing the waiting game I ordered a TON! of parts and will be upping the boost and getting new dyno results my tune date was set for Oct. 6th
Some parts came in 9/10/10
aem v2
id1000's and hondata 3 bar map sensor
and i ordered some more parts later that day
9/20/10
got a large box today
My car will also be going in the body shop today
Ill have pix up later in the day.
back side sneek peek
get it back from the body shop thursday
9/23/10
Just got it back from the body shop , pretty terrible pic's off my phone but for now thats all i got.
I'll get more up tommorow maybe
9/24/10
sum new pix of it atleast cleaned lol , still drive way shots but better then the ones from last night.
got my new cusco catch can and installed it.
10/12/10
More to come
!!!!!!!NEW DYNO VID !!!!!!!!
http://www.youtube.com/watch?v=zlX6MPVjr-E
Had a boost leak and theres a big possibilty a lost hp with the 5zigen header over my stock tbh.
Im gonna be fixing the leak, putting stock header back on, getting a new filter cause this foam one sux, getting a new charge pipe elbow with a slightly larger diameter and no holes in it , and retuning it to see if i can pick up some more power.
The parts I ordered about a month ago are going to be arriving a bit later then expected so my next major update won't be for a few weeks.
More pix 10/16/10
11/3/10
After a well worth wait Gotuning.com hooked it up!!!!
Here's a few peaks before install
And yes although its not in the picture I did buy 2 seats
11/20/10
Here's my latest update
quick sneak peak waiting on a few parts so i wont have the car done for a bit.
cusco 5pt
Tial bov
More to come hoping that I'll get to have it back for a week or so before snow hits.
#4
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Re: My 03 S2K Build
Major pic update ! ! !
Did a recent shoot with justin check out some of his work on www.twentypsi.com
Did a recent shoot with justin check out some of his work on www.twentypsi.com
#6
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Re: My 03 S2K Build
These are some recent pix of what the s has been up to with it getting much colder out its been sitting more and more in the garage.
I let me gf take it for a spin
these are a few shots from a local meet that someone posted up on a diffrent forum
I got my 2nd seat rail in along with a cat and some ap2 headlights
Installed the alpine IDA-x305s so i can finally put my iphone to use.
I need to take some time to learn the buttons more so i dont have to keep looking down while driving but other then that its an awesome unit.
got my headlights out rdy for the ap2's to go in
All buffed up and in i also got a chance to put my 2nd seat in.
I also recently just sold my Works =( , My new rims come in Friday Ill be running an extremely more aggressive setup so expect some major updates .
I let me gf take it for a spin
these are a few shots from a local meet that someone posted up on a diffrent forum
I got my 2nd seat rail in along with a cat and some ap2 headlights
Installed the alpine IDA-x305s so i can finally put my iphone to use.
I need to take some time to learn the buttons more so i dont have to keep looking down while driving but other then that its an awesome unit.
got my headlights out rdy for the ap2's to go in
All buffed up and in i also got a chance to put my 2nd seat in.
I also recently just sold my Works =( , My new rims come in Friday Ill be running an extremely more aggressive setup so expect some major updates .
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
#9
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Re: My 03 S2K Build
boxes are deceiving
Fitment is gonna be a PITA.(body shop time!!!)
gonna need about an inch in the rear
and 2 inches up front
and they are not staying white =(
Fitment is gonna be a PITA.(body shop time!!!)
gonna need about an inch in the rear
and 2 inches up front
and they are not staying white =(
#13
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
#14
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Re: My 03 S2K Build
Thank you
#15
Honda-Tech Member
iTrader: (1)
Join Date: Sep 2006
Location: San Francisco, CA, US
Posts: 5,347
Likes: 0
Received 0 Likes
on
0 Posts
Re: My 03 S2K Build
sick fitment on the TE's if you can keep it stock body
wish the pics worked for me lol refreshed the thread 3-4x to see all the pics. keep up the good work
wish the pics worked for me lol refreshed the thread 3-4x to see all the pics. keep up the good work
#16
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Re: My 03 S2K Build
I plan on making over 500 rwhp this summer and im trying to keep my rear camber around -3 so I get some sort of traction. Im gonna run a non staggered setup with the tires as well.
Thinking of running re 11's 255/35r18 all the way around.
#18
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Re: My 03 S2K Build
Currently im working from home doing webdesign, buisness cards, ads and banners for websites.
I've been trying my hand at stocks a bit to on etrade.
I've also been doing alot of buying and selling on ebay/craigslist and other sources.
I'm really trying to open a performance/aftermarket part store but I'd like to go halfs with someone and havent really found anyone who really want's to.
#20
Honda-Tech Member
Join Date: Oct 2007
Location: Auckland, drunk, NZ
Posts: 2,808
Likes: 0
Received 0 Likes
on
0 Posts