Who makes a 2.5" header for the 4th gen?
#2
Re: Who makes a 2.5" header for the 4th gen? (satan_srv)
Kamikaze Headers
" Kamikaze's extensive Research and Development
department has intensively studied the racing industry.
The 4 into 1 into 2 single outlet, two piece
Honda/Acura header system is the fruit of our research.
Our headers also feature the largest tubing available
of 1 3/4" tubing using 14 gauge mild steel.
Compared to standard headers of only 1 1/2" or 1 5/8".
Not only is our tubing larger but we also are the first to
offer 2 1/2" collector opening. "
source:http://members.aol.com/kmikzehpp/const.htm
[Modified by h22congee, 7:54 AM 9/20/2002]
" Kamikaze's extensive Research and Development
department has intensively studied the racing industry.
The 4 into 1 into 2 single outlet, two piece
Honda/Acura header system is the fruit of our research.
Our headers also feature the largest tubing available
of 1 3/4" tubing using 14 gauge mild steel.
Compared to standard headers of only 1 1/2" or 1 5/8".
Not only is our tubing larger but we also are the first to
offer 2 1/2" collector opening. "
source:http://members.aol.com/kmikzehpp/const.htm
[Modified by h22congee, 7:54 AM 9/20/2002]
#3
Member
Thread Starter
Re: Who makes a 2.5" header for the 4th gen? (h22congee)
they can't even spell horsepower!!
Looks like it's a custom job, good thing brullen exhaust is not too far away
Looks like it's a custom job, good thing brullen exhaust is not too far away
#5
Member
Thread Starter
Re: Who makes a 2.5" header for the 4th gen? (bgod)
just had a jun header but sold it. had a 2.4 inch collector.
#6
Re: Who makes a 2.5" header for the 4th gen? (satan_srv)
it was a friends. never dynoed but the before and after was very nice.
not much low end of course but the power near the vtec engagement point and top end was greatly improved. not sure if that's because the size of the collector or the beefy primaries and secondaries.
not much low end of course but the power near the vtec engagement point and top end was greatly improved. not sure if that's because the size of the collector or the beefy primaries and secondaries.
#7
Member
Thread Starter
Re: Who makes a 2.5" header for the 4th gen? (bgod)
it was a friends. never dynoed but the before and after was very nice.
not much low end of course but the power near the vtec engagement point and top end was greatly improved. not sure if that's because the size of the collector or the beefy primaries and secondaries.
not much low end of course but the power near the vtec engagement point and top end was greatly improved. not sure if that's because the size of the collector or the beefy primaries and secondaries.
Trending Topics
#8
Re: Who makes a 2.5" header for the 4th gen? (satan_srv)
new is about $1000. design is similar to mugen and no, doesn't require any hacking of any sort.
i just sold mine for $450 shipped. too bad you missed it.
i just sold mine for $450 shipped. too bad you missed it.
#9
Member
Thread Starter
Re: Who makes a 2.5" header for the 4th gen? (bgod)
new is about $1000. design is similar to mugen and no, doesn't require any hacking of any sort.
i just sold mine for $450 shipped. too bad you missed it.
i just sold mine for $450 shipped. too bad you missed it.
#11
Member
Thread Starter
Re: Who makes a 2.5" header for the 4th gen? (SMSP)
doesn't require any hacking of any sort.
Production version shouldn't either.
Production version shouldn't either.
#13
Honda-Tech Member
Re: Who makes a 2.5" header for the 4th gen? (satan_srv)
doesn't require any hacking of any sort.
Production version shouldn't either.
Is this the 4-1 or the 4-2-1?
Production version shouldn't either.
Is this the 4-1 or the 4-2-1?
.. With the 4-1, there just simply is not enough ground clearence with lowered cars, and having to trim up the subframe is a pain (just not enough room for the pipes)..
#14
Member
Thread Starter
Re: Who makes a 2.5" header for the 4th gen? (Honda318dx)
4-2-1
.. With the 4-1, there just simply is not enough ground clearence with lowered cars, and having to trim up the subframe is a pain (just not enough room for the pipes)..
.. With the 4-1, there just simply is not enough ground clearence with lowered cars, and having to trim up the subframe is a pain (just not enough room for the pipes)..
#15
Honda-Tech Member
Join Date: Nov 2000
Location: Fredericksburg, VA, USA
Posts: 5,135
Likes: 0
Received 0 Likes
on
0 Posts
Re: Who makes a 2.5" header for the 4th gen? (satan_srv)
Did your beaten up 4-2-1 header get sold? Any production targets for the 4-2-1 header?
Going to do one more prototype 4-2-1 to compare to the current one on Corey's car. I probably won't start building production versions until the end of the year. Sorry to the guys already on the build list.
Good luck 2 point6
#16
Re: Who makes a 2.5" header for the 4th gen? (satan_srv)
2.5" primaries/collector. What companies make this for the H22A1?
#17
New User
Join Date: Sep 2001
Location: Stafford, Va, USA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Re: Who makes a 2.5" header for the 4th gen? (SMSP)
Did your beaten up 4-2-1 header get sold? Any production targets for the 4-2-1 header?
Corey, you not telling me something????
Corey, you not telling me something????
Don't worry Dave, the 4-2-1 is just great. Warren won't admit how much I pulled on his ITR at Lowes.
It was the 4-1 that got a little dinged up, and 2point6 (Scott) has it now, and is going to put it on his accord, we all are hoping to see good gains..
#19
Honda-Tech Member
Re: Who makes a 2.5" header for the 4th gen? (satan_srv)
new is about $1000. design is similar to mugen and no, doesn't require any hacking of any sort.
i just sold mine for $450 shipped. too bad you missed it.
Pissed off he missed it
i just sold mine for $450 shipped. too bad you missed it.
Pissed off he missed it
#20
Honda-Tech Member
Re: Who makes a 2.5" header for the 4th gen? (hot_EG)
Oh, and for those of you wondering about the Kamikaze Header, here's what the sales rep emailed me when I asked about their header for a '92+ Prelude VTEC:
*I hate when people can't spell my freakin name right!!!!!!*
'Dear Johnathan,
Thank you for your interest in our performance headers. We offer an application for your vehicle in either High Temp. Black Coating for $275.00, Nickel Polish Chrome for $295.00, or our all New Titanium Ceramic Coat for $330.00.
We believe we have the finest quality performance headers available with our latest technology 4 into 1 systems, with the largest tubing diameter of 13/4.GÇ¥ Dyno tested and race proven. Here at Kamikaze Performance Products we strive to provide quality race products with the newest technology.
Please give us a call if you have any further questions at the phone numbers below If you would like to place an order you can do so by phone/fax we accept most credit cards or by Cashiers check / Money order by mail.For shipping it is $18.00 for UPS ground.
We look forward in doing business with you. Thank you for your time and consideration of our product.
Sincerely,
Traci Contreras
Sales Marketing Manager
Kamikaze Performance Products
(909)548-6223
Fax (909)548-0922
12365 Central Avenue #B
Chino, CA. 91710'
I've seen one of their B series headers in person and it looked very nice. Friend said he felt a good after on the butt dyno with his B16. They make really nice pieces, and for the life of me I can't comprehend why they don't have a real website up yet.
*I hate when people can't spell my freakin name right!!!!!!*
'Dear Johnathan,
Thank you for your interest in our performance headers. We offer an application for your vehicle in either High Temp. Black Coating for $275.00, Nickel Polish Chrome for $295.00, or our all New Titanium Ceramic Coat for $330.00.
We believe we have the finest quality performance headers available with our latest technology 4 into 1 systems, with the largest tubing diameter of 13/4.GÇ¥ Dyno tested and race proven. Here at Kamikaze Performance Products we strive to provide quality race products with the newest technology.
Please give us a call if you have any further questions at the phone numbers below If you would like to place an order you can do so by phone/fax we accept most credit cards or by Cashiers check / Money order by mail.For shipping it is $18.00 for UPS ground.
We look forward in doing business with you. Thank you for your time and consideration of our product.
Sincerely,
Traci Contreras
Sales Marketing Manager
Kamikaze Performance Products
(909)548-6223
Fax (909)548-0922
12365 Central Avenue #B
Chino, CA. 91710'
I've seen one of their B series headers in person and it looked very nice. Friend said he felt a good after on the butt dyno with his B16. They make really nice pieces, and for the life of me I can't comprehend why they don't have a real website up yet.
#21
Member
Thread Starter
Re: Who makes a 2.5" header for the 4th gen? (kb58)
2.5" primaries/collector. What companies make this for the H22A1?
Someone is on crack if they say they have 2.5" primaries...
Someone is on crack if they say they have 2.5" primaries...
#22
Member
Thread Starter
Re: Who makes a 2.5" header for the 4th gen? (hot_EG)
new is about $1000. design is similar to mugen and no, doesn't require any hacking of any sort.
i just sold mine for $450 shipped. too bad you missed it.
Pissed off he missed it
Elated he got it
i just sold mine for $450 shipped. too bad you missed it.
Pissed off he missed it
Elated he got it
#23
Re: Who makes a 2.5" header for the 4th gen? (satan_srv)
i would like a 4-1 but on my civic i think it would set way to low,
will a 4-2-1 stil make decent top end power?
will a 4-2-1 stil make decent top end power?
#24
Honda-Tech Member
Re: Who makes a 2.5" header for the 4th gen? (H22a-CX)
On the dyno, the 4-2-1 yeilded better top end power, by about 3 HP in the last thousand RPM's to redline..