bykfixer

Wiped the snow off the car covers and ordered parts for the s.h.
Oh and began ground work for designing the sound system for my s.h.

tzg

Drove it some, since the roads cleared off and it was a bit warm.

SUB-0 H23

In my case the cig lighter illumination light was grounding ..

Replaced iacv rad hose .. That's a pita to switch out .. The way it sits under intake mani ..

nteglude

Stripped my A4 down to bare block to do master rebuild for boost build, after 90k miles and 400lbs of nitrous sprayed at 85 shot, internals were spotless lol.

sowhatsup

Bondoed the rust spots. Changed the exhaust to apexi ws2


2 weeks from now coilovers and brakes

bykfixer

Nothing today except gawk at it.
The past week oem speakers arrived. New shift boot, **** arrived. Better moldings and trim procured and more parts soon to come.
The 97 got oem air cleaner install complete with the vacuum tank being replaced. Painted prelude in 5th gen lettering on the rear of the tailor made cover.
The 91 got some tlc too. Broke out simple green and q-tips for some sprucing it up.
Was a good week for spending time on my preludes.

Junkyard excursion this weekend. A pair of 5th gens nearby and a new 89 too. Pickings should be good because not many prelude fans in my area.

92bluepreludeSi

have oil leaks and have no idea where its coming from! woooo!

yroachy

^ dizzy oring and intake cam plug would be the first places I looked, followed by the oil cooler oring.

friutoftheLude

I have to come down there, i cant find a 5th gen at a junkyard in Baltimore, they laugh at me, lolol

theBB1er

Got my new O2 sensor
Ordered a test pipe for my custom exhaust
Did some research
Watched some Prelude videos on Youtube

FallenOne

Just got my OEM Front and Rear lips and OEM Sides are on their way.

FallenOne

Also about to order a TEIN Coilover kit, Rims, and Tires. Painting soon after.

Danny Fallas

This is what my babe has got so far:

Interior & Exterior: Oem Fog Lights, Oem VTEC 15" Rims , Stock Look.

Engine: 2.5" Muffler, Air Intake, Aem EMS, Balance Shaft removal.

Comming soon: Tein Complete Suspension, whole body paint (OEM RED), H22a camshafts and 11:1 pistons, Valves springs and retainers.

BB1 H22A LUDE

Got to play with the intake and exhaust manifold as well as break the knock sensor off clean... Lucky I had a spare floating around.

916lude

Replaced leaky cam plug. Adjusted valves (runs sooooo much smoother now)

Noticed the top gasket on my vtec solenoid is leaking. Just recently changed the gasket that mates with the block so I guess this one wanted to go a few weeks later. Simple fix

BlackCatt

Customising my rear number plate holder. Shaving the key hole
also. From what i understand their were two types produced
for the 4g lude. Japanese and American plates fit perfect with
no sign of the hollow part behind the plate. The euro type
plate holders of course are wider to accomodate the longer
type plates. Unfortunately Australian plates are slightly
longer but not as tall as jap/us plates so you can see two
of the hollow areas behind the plate. It has always bugged
me so i have filled in parts of the hollow section and i will
now be able to refit the plates soon and it will look perfect
and centered. Will post pics to show better what i am talking
about, when i get some time.

BlackCatt

^ pics

See the two hollow gaps above the plate. Btw if you raise the
plate to cover those gaps, there are gaps below the plate.


upload pic


As it is now with gaps filled and key hole shaved. Will paint soon, and
post pics. I will be able to perfectly center the plate and i think it will
look much better.



photo hosting sites

916lude

My lude and I got pulled over yesterday. Cop popped the hood and stood there admiring all my stock greatness. Wish he let me out of the car so I could admire it too. Off I went.

Changed transmission fluid with Honda MTF. My old fluid was nasty. A lot smoother now

Droops42

Changed the oil cooler o ring.

yroachy

Did some more depinning...


Still lots more to clean up!

Droops42

Drove it today, can't run it hard in this L.A. traffic.

theBB1er

-Changed PS/Alt belt.
-Removed 18 year old environment cover, got a brand new OEM one I'll be putting on
-Chipping away at changing sway bar links...patience required...

axlline

Finished up today.

bykfixer

Junkyard run yielded parts for the 91 interior black and tan interior project. Tools for motor swap/repair accumulating. Searching for low mileage B21 or re-mfd short block.

Vinyl and plastic cleaned for change to white accents in the 97 interior. Q-ball shift **** and a bunch of other pieces and parts procured. Parts from a 99 part out arriving weekly. Engine bay cleanup continues. A brisk drive in the country side likely today.

bykfixer

There was one and it was stripped clean as a whistle. I got the thermal research cat back and some depo's. Also a few tan interior parts for a white interior accent project and a gauge cluster for a depog member.
Check out 'circle auto recycling . com' and get on there wish list notifications. They have 4 yards in the richmond area. Also Bruce's auto, Woodfin's and Lacy around richmond. 5ths are mostly in the norfolk/suffolk area. Richmond gets all the 3rds and 4ths.
Good luck.