Base v. Type SH - outer tie rod ends
07-16-2008, 03:46 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2003
Location: Chicago
Posts: 6,619
Likes: 0
Received 0 Likes
on
0 Posts
Base v. Type SH - outer tie rod ends
I know the rack is different, but that's only the ratio. Why do they have different part numbers? The inner tie rods are the same between the two, only the outer ones have different p/n's.
07-16-2008, 04:41 PM
#2
Honda-Tech Member
Join Date: Dec 2004
Location: Drexel Hill, Pa, 19026
Posts: 2,801
Likes: 0
Received 0 Likes
on
0 Posts
Re: Base v. Type SH - outer tie rod ends (vinuneuro)
all i know is im putting a traction bar on and i was told along with a bunch of other things i have to change over the tie rod ends also. And I also saw that its two different part numbers. I have sat the parts next to each other so I couldnt say exactly what is different.
07-16-2008, 04:52 PM
#3
Honda-Tech Member
Thread Starter
Join Date: Oct 2003
Location: Chicago
Posts: 6,619
Likes: 0
Received 0 Likes
on
0 Posts
Re: Base v. Type SH - outer tie rod ends (lude98SH)
Are they exactly the same length? I'd imagine the thread sizes have to be identical since the inner tie rods are the same between both.
Thread
Thread Starter
Forum
Replies
Last Post
STPREZ
Honda Civic / Del Sol (1992 - 2000)
4
01-11-2005 04:34 PM
Boosted Chemist
Honda CRX / EF Civic (1988 - 1991)
3
06-14-2004 03:19 AM
