Black S2K

Hey guys I am a complete noob when it comes to bikes. Im helping out a friend that completely incompetent when it comes to anything mechanical. This bike is my friends bike. 02 f4i cbr600

Brief history: He bought it like 3 years ago rode it for barely a season got pulled over and in trouble and the bike sat for a couple years. The bike was a stunt bike so I took all the dumb stunt **** off like the 12 o'clock bar and other ****. All of the fairings were done so I stripped it to give it that "street fighter" look. On the mechanical side the bike is great. I got a new battery, fresh tank of gas, fresh oil change and about to bleed the breaks with fresh ate super blue. breaks still have plenty of meat and tries are also good (he got brand new ones right b4 he put the bike away and I have no idea how they r not dry rotted yet but they looks great and stick pretty well when i was ridding it today).

My problem right now is figuring out this dumb *** led integrated rear tail light. I wired everything up last night and everything was working fine. now this morning the turn signals dont work the running/brake lights up fine but the turn signals wont flash on the light and they wont flash on the dash/ whatever you call it display. I double checked the wiring and the fuse everything is fine. could it b that i never used a resistor with this led tail light(doucher lost it and I never bothered to get a new one). Also since the back end was all chopped up due to the 12bar the previous owner wired up gsxr led tail lights. the wiring was a night mare but I figured it out and got it to work.

plz help with this turn signal issue.

also if anyone has any tips for these bikes I'm all ears cause ill be working on this constantly since my friend cant do it.

Thanx guys.

Black S2K

think i figured it out one of the relays in the front has cracked off due to the shitty ziptie job guess the fork crushed it.