Kenji Shinomori

SO! I am starting this journey. I already have a 1991 Honda Civic Wagon auto in my possession, but the engine is.. in a complicated state of disassembly. So my friend prompted the idea of a b20 swap with the RT4WD transmission, since it would cost around the same as replacing the original engine! So, thats what I'm going to do. I already found a seller on ebay that is selling JDM b20 engines within budget, and I can find the transmission for the RT4WD on ebay and still be in budget. That part is no problem. The parts I am worried about are.. I don't really know what parts to get after that. Its going to be a manual six speed, and i know that I'll need conversion parts to make it a proper manual car. I just dont know those parts in detail.

I was wondering, can anyone give me a list/supply a link to a list of parts I'll need to make this swap successful? I do have a friend that will be helping me who is a trained master mechanic, so If I stumble on any parts, he will help me along. I am going to try to do most of it myself as a learning experience. Can anyone help me? ;w; Are there any conversion plates I'll need for attaching the b20 to the transmission? Literally any help is appreciated.

TurboJaxx

You'll want a CRV AWD trans to make this work..even then there are a lot more complications that I am unsure of.

EE2bitsk

i have a manual crv trans i don't need.
don't think the b2d plate will work on the rtawd trans.

~sp33~

Basically nothing about what you want to do will work.

4drEF

B20 found on eBay is within budget for this build.
End of thread.
Build is never going to happen.

G-power

B2d manual rt4wd perfect

91efdx

Step 1- buy good running AWD CRV 97-01.
Step 2- take all the driveline out of CRV and put into wagon (lots of welding and custom fab work)
Step 3- enjoy

4drEF

FTFY.

91efdx