My CRX Project... lets see how this goes!!
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Ankeny, IA, US
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
My CRX Project... lets see how this goes!!
Well I picked up the shell last night came with alot of extra stuff. and still going back to pick up more later this week..
Anyways. I got the car pretty much gutted. and the person before was starting a wire and brake line tuck..
Today I stripped the car of all the wiring, doors, and fenders. and started the body work. It has norm. honda rust but it looks like it has been tended to before. with some really crapy bondo but here are some pics of what i am working with.
Bring it home
Starting to strip it down and what not
Anyways. I got the car pretty much gutted. and the person before was starting a wire and brake line tuck..
Today I stripped the car of all the wiring, doors, and fenders. and started the body work. It has norm. honda rust but it looks like it has been tended to before. with some really crapy bondo but here are some pics of what i am working with.
Bring it home
Starting to strip it down and what not
Last edited by JDM_EK_621; 08-17-2009 at 12:25 PM.
#7
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Ankeny, IA, US
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Re: My CRX Project... lets see how this goes!!
Just an update. I sand blasted all the rust areas and then cut out all the parts that where bad. ill have pics up tomm.
Trending Topics
#12
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Ankeny, IA, US
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
#13
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Ankeny, IA, US
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Re: My CRX Project... lets see how this goes!!
WHOOT!!!!! the find of the day..... B16 cable tranny
Then here are some pics of what i worked on last night. cut out some of the rust in one area need to clean it up and then weld in the new metal..
and then here is one of the 1/4's almost done just needs alil filler to smooth it out
Then here are some pics of what i worked on last night. cut out some of the rust in one area need to clean it up and then weld in the new metal..
and then here is one of the 1/4's almost done just needs alil filler to smooth it out
Last edited by JDM_EK_621; 08-17-2009 at 12:26 PM.
#15
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Ankeny, IA, US
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
#16
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Ankeny, IA, US
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Re: My CRX Project... lets see how this goes!!
Got the whole inside cleaned out sanded and primered. also picked up my supplys to paint the car.. here are some pics.
#18
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Ankeny, IA, US
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
#19
Re: My CRX Project... lets see how this goes!!
No. I bought my crx when i was 16, a rolling shell and i put a motor in and drove it for a while. then i got a DA teg and shelved the rex and pulled the motor, so its been sitting in my garage for about 3 years now. I have done a couple cool things, nothing major just a rear disc swap and integra break booster, and lowered it. i need to get it going or sell it. its got no rust anywhere. all original paint and body panels, no fixes.
#20
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Ankeny, IA, US
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Re: My CRX Project... lets see how this goes!!
No. I bought my crx when i was 16, a rolling shell and i put a motor in and drove it for a while. then i got a DA teg and shelved the rex and pulled the motor, so its been sitting in my garage for about 3 years now. I have done a couple cool things, nothing major just a rear disc swap and integra break booster, and lowered it. i need to get it going or sell it. its got no rust anywhere. all original paint and body panels, no fixes.
I say get going on the car.. lol dont sell it
#22
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Ankeny, IA, US
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
#24
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Ankeny, IA, US
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts