Jaime 91SiB18
#4
Trending Topics
#18
Honda-Tech Member
Join Date: Sep 2009
Location: Lotus (BFE) CA
Posts: 787
Likes: 0
Received 0 Likes
on
0 Posts
Re: Jaime 91SiB18
I think i might have just changed my mind on looking for stock si seats.
are they power seats? or manual?
how do they fit width-wise in the car?
And do i see an RSX shift boot too?
#19
Honda-Tech Member
Thread Starter
Re: Jaime 91SiB18
Width wise they are fine.
The shift boot is a Integra Type-R.
Thanks
#20
Honda-Tech Member
Join Date: Sep 2009
Location: Lotus (BFE) CA
Posts: 787
Likes: 0
Received 0 Likes
on
0 Posts
Re: Jaime 91SiB18
Sooo, i guess im add those seats to my list of things to look for!
Not sure what will be harder to find. Clean Stock SI Seats, or those. Haha
Are those speaker grills in the rear stock? or did you mod them from something else too?
Not sure what will be harder to find. Clean Stock SI Seats, or those. Haha
Are those speaker grills in the rear stock? or did you mod them from something else too?
#21
Honda-Tech Member
Thread Starter
#24
Honda-Tech Member
Thread Starter
Re: Jaime 91SiB18
One of my new projects. Filling a Wings West Mid-Wing's unneeded gap/open space for the wiper, and extending and sharpening the rear trailing edge. It will be @1/2" longer when finished. The edge didn't match the sharp lines on the JDM SIR wing. I used structural carbon fiber, used to wrap concrete beams in commercial buildings for new floor additions after the fact. I laid a flat plate of the carbon fiber, then two layers of stranded fiberglass, then the carbon fiber, making a sandwich. I made a filler, backbone peice and glued it in with a milled glass fiber/epoxy compound. Then laid standard medium weave carbon fiber strips over the seams on each side.
The idea being to strengthen the wing and make it solid to prevent cracking at the fill site.
I've drilled holes in the carbon plate and wing within the fill site and foamed it in, as well as trimed and shaved the fom in preperation for later fiberglassing. The foam adds more structure and ties the whole thing together.(That's the idea anyway ) It's in the works as time allows...
And one of my newly complete converted doors...
Here is the wing after foming, forming, and fiberglassing.
Wing all glassed in..
JDM Power Windows in..
**I've never seen anyone re-seal the door like this as Honda delivered it to the lot.**
Wing Progress:
More on my Wing Project...
Clayton sanding...
Still alot of work left, but much progress in the past few days.
These pictures are not up to date.
The wing is almost ready fo paint.
Pics soon.
The idea being to strengthen the wing and make it solid to prevent cracking at the fill site.
I've drilled holes in the carbon plate and wing within the fill site and foamed it in, as well as trimed and shaved the fom in preperation for later fiberglassing. The foam adds more structure and ties the whole thing together.(That's the idea anyway ) It's in the works as time allows...
And one of my newly complete converted doors...
Here is the wing after foming, forming, and fiberglassing.
Wing all glassed in..
JDM Power Windows in..
**I've never seen anyone re-seal the door like this as Honda delivered it to the lot.**
Wing Progress:
More on my Wing Project...
Clayton sanding...
Still alot of work left, but much progress in the past few days.
These pictures are not up to date.
The wing is almost ready fo paint.
Pics soon.