ED7 Si Build up
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2005
Location: Somewhere
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
ED7 Si Build up
Hey guys,
I am building up my 90 civic EF SI. It will be a slow build... I have had many honda's over the years. EG 4 doors, Del Sol, CD7, EP3, FG2, EK. I used to be on here as VTEC Is YOUR Best Friend years ago. This is my first time doing a ground up build. I have always wanted a EF Si and God granted me favor to obtain one. It came with a swap in it. JDM B18C with a cable trans. Whoever had the car before didn't take care of it. It does have pretty mint interior besides a couple missing interior pieces that I am obtaining as time goes. I am in the process of gutting the shell and going to paint the inside and out, re-coat the under-body with paint. My father in law has a rotisserie which I will use to flip it over to paint it. My plans are to fully restore this EF to prestine condition with OEM, JDM, Quality parts only.
Some of the pictures when I Got it and where I am at through the build process.
Progress: Pulled the motor
I have everything placed in baggies and using a label maker for each thing. Very helpful.
Removed the interior.
I am building up my 90 civic EF SI. It will be a slow build... I have had many honda's over the years. EG 4 doors, Del Sol, CD7, EP3, FG2, EK. I used to be on here as VTEC Is YOUR Best Friend years ago. This is my first time doing a ground up build. I have always wanted a EF Si and God granted me favor to obtain one. It came with a swap in it. JDM B18C with a cable trans. Whoever had the car before didn't take care of it. It does have pretty mint interior besides a couple missing interior pieces that I am obtaining as time goes. I am in the process of gutting the shell and going to paint the inside and out, re-coat the under-body with paint. My father in law has a rotisserie which I will use to flip it over to paint it. My plans are to fully restore this EF to prestine condition with OEM, JDM, Quality parts only.
Some of the pictures when I Got it and where I am at through the build process.
Progress: Pulled the motor
I have everything placed in baggies and using a label maker for each thing. Very helpful.
Removed the interior.
Last edited by EG9_Sedan; 09-02-2015 at 04:03 PM.
#4
Honda-Tech Member
Thread Starter
Join Date: Jun 2005
Location: Somewhere
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
#5
Honda-Tech Member
Thread Starter
Join Date: Jun 2005
Location: Somewhere
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Re: ED7 Si Build up
Anyone know what these are called and how I can get more of these? There is also a 3rd type which is a push kind that has a small loop on it....
Trending Topics
#8
Honda-Tech Member
Join Date: Mar 2013
Location: Richmond, VA
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Re: ED7 Si Build up
That looks like my 55 yo wifes ride just before a ho hit me and totalled it. I am just sick, want to sell it? Need a clean, straight, no rust shell for the B16 and other new stuff I have put into it in the last few years.
Regards
Dave
Regards
Dave
#11
Honda-Tech Member
Join Date: Aug 2007
Location: Mechanicsville, VA, USA
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Re: ED7 Si Build up
You need to look here and figure out which one it is.
1991 Honda Civic 3 Door SI KA 5MT Wire Harness - HondaPartsNow.com
1991 Honda Civic 3 Door SI KA 5MT Wire Harness - HondaPartsNow.com
#17
Honda-Tech Member
Thread Starter
Join Date: Jun 2005
Location: Somewhere
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Z0831xiz
Honda CRX / EF Civic (1988 - 1991)
22
03-28-2013 11:52 AM