Clutch change caused car to stop driving
#1
Clutch change caused car to stop driving
I have a 1990 Honda Civic lx sedan, I changed the rear main seal, flywheel, pilot bearing, clutch disk and pressure plate (https://www.rockauto.com/en/moreinfo...168321&jsn=368), and both axles.
The problem I'm having is once I got the car back together, I drive down the street (half a mile or so), hear a clunk and the car no longer moves. I can shift into gear but it's like the engine is no longer connected to the transmission. I need to know what is causing this and how to fix it. I've dropped the tranny twice now and reassembled, and the same drive for two seconds and clunk, car no go.
The problem I'm having is once I got the car back together, I drive down the street (half a mile or so), hear a clunk and the car no longer moves. I can shift into gear but it's like the engine is no longer connected to the transmission. I need to know what is causing this and how to fix it. I've dropped the tranny twice now and reassembled, and the same drive for two seconds and clunk, car no go.
Thread
Thread Starter
Forum
Replies
Last Post
tooqwik1
Honda Civic / Del Sol (1992 - 2000)
8
07-14-2002 03:26 AM