Civic AWD axle bore, spline count
#1
Honda-Tech Member
Thread Starter
Join Date: May 2004
Location: WISCONSIN
Posts: 1,085
Likes: 0
Received 0 Likes
on
0 Posts
Civic AWD axle bore, spline count
What is the axle bore and spline count for the Civic AWD wagon? It has an intermediate shaft, and might work with my d16a6 depending on the axles to make equal length axle setup. What is the inner CV joint's spline count and axle bore? Same as a crx, either 21 spline for 88, or 20 spline for 89-91??
any awd guys out there???
Does the Civic AWD wagon have the same intermediate shaft as the 86-89 integra?
Modified by Killa-X at 6:52 AM 12/15/2004
any awd guys out there???
Does the Civic AWD wagon have the same intermediate shaft as the 86-89 integra?
Modified by Killa-X at 6:52 AM 12/15/2004
#2
Honda-Tech Member
iTrader: (7)
Join Date: Mar 2009
Location: KANSAS
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
Re: Civic AWD axle bore, spline count
Revived from the dead! Well I need to know pretty much the same thing. The spine count ur thinking is tranny to block and all the inputs on both sides for both axles for every year is the same. Only diff is the HF and th STD outer hub size.
***I need to know if my 88 si trans on my 90 crx dx would accept an axle on the driver side from an awd civic w. Its Intermediate shaft work w. My dohc Zc?*** Anyone please help me out
***I need to know if my 88 si trans on my 90 crx dx would accept an axle on the driver side from an awd civic w. Its Intermediate shaft work w. My dohc Zc?*** Anyone please help me out
Thread
Thread Starter
Forum
Replies
Last Post
minime-dom
Honda CRX / EF Civic (1988 - 1991)
7
07-12-2009 09:30 PM