87 cx si and delta cam settings-
#1
Thread Starter
Join Date: Mar 2002
Location: Albany, Oregon, U.S
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
87 cx si and delta cam settings-
My compression was 185 accross all 4. thats weird. So many resources say diferent things. well im happy. the plugs look great too.
The car runs great but something is missing. Fuel to air is good on ratio. timing is 3 degrees advanced. I have a stge 3 hot cam by delta. full exhaust, cold air intake and the 87 integra TB. But still the car seems to lack pull in the low end! Valves are set to .008 intake and.009 exhaust. any tighter than that and the valves dont seat all the way after warm up resulting in loss of power and compression.
I need the proper timing spec and valve specs for the delta cam, the manufacturers settings wont work from what iv'e heard about cam tuning. some one please help meh. I have looked every where! And I havnt been able to get a hold of delta camshafts.
Thanks.
The car runs great but something is missing. Fuel to air is good on ratio. timing is 3 degrees advanced. I have a stge 3 hot cam by delta. full exhaust, cold air intake and the 87 integra TB. But still the car seems to lack pull in the low end! Valves are set to .008 intake and.009 exhaust. any tighter than that and the valves dont seat all the way after warm up resulting in loss of power and compression.
I need the proper timing spec and valve specs for the delta cam, the manufacturers settings wont work from what iv'e heard about cam tuning. some one please help meh. I have looked every where! And I havnt been able to get a hold of delta camshafts.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
DIRep972
Forced Induction
8
01-16-2002 07:29 AM