5600 RPM fall out.
04-04-2009, 12:23 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2008
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
5600 RPM fall out.
I have a OBD-1 B16, with VAFC2, and just got it. When it hits 5500 RPM's it falls flat on its face, but if I am going and downshift to where it would be about 5500, its runs fine, but no VTEC.
Anyone have ideas what could be causing this?
Anyone have ideas what could be causing this?
04-05-2009, 06:59 PM
#2
Junior Member
Thread Starter
Join Date: Jul 2008
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Re: 5600 RPM fall out.
Bump.
I figured out that if I let it rev over 5600 at less than 50% throttle it will go over it. (But whats the point of that).
Also if I got 100% throttle it will bog at any RPM really.
It basically like hits a wall...
What is causing this?
I figured out that if I let it rev over 5600 at less than 50% throttle it will go over it. (But whats the point of that).
Also if I got 100% throttle it will bog at any RPM really.
It basically like hits a wall...
What is causing this?
Thread
Thread Starter
Forum
Replies
Last Post
Honda_San
Honda Civic / Del Sol (1992 - 2000)
3
08-27-2009 08:40 AM
