[FAQ] How-To: Installing Password:JDM front lip onto USDM 90-91 CRX
#26
Honda-Tech Member
Join Date: May 2004
Location: A racetrack near you, CA, USA
Posts: 3,024
Likes: 0
Received 0 Likes
on
0 Posts
Re: [FAQ] How-To: Installing Password:JDM front lip onto USDM 90-91 CRX (Mr_CRX)
looks good adam ...i gotta make those brackets for mine lol
#28
Honda-Tech Member
Re: [FAQ] How-To: Installing Password:JDM front lip onto USDM 90-91 CRX (spoonef)
thanks for the how to! i have had this lip for a while and haven't put it on because i was unsure how to mount it and what needed to be modified.
i did a test fit and the front part of the lip stuck out from the bumper about an inch. so i think the way you mounted it should pull it close to the bumper.
i did a test fit and the front part of the lip stuck out from the bumper about an inch. so i think the way you mounted it should pull it close to the bumper.
#29
Re: [FAQ] How-To: Installing Password:JDM front lip onto USDM 90-91 CRX (Disco Monkey)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Disco Monkey »</TD></TR><TR><TD CLASS="quote">
i did a test fit and the front part of the lip stuck out from the bumper about an inch. so i think the way you mounted it should pull it close to the bumper.</TD></TR></TABLE>
It was the same way on mine.. i don't think it hung out quite an inch, but I pushed it in as far as I wanted it before I drilled the holes in it to mount to the brackets. They definitely pulled the middle of the lip in. Good luck with yours
i did a test fit and the front part of the lip stuck out from the bumper about an inch. so i think the way you mounted it should pull it close to the bumper.</TD></TR></TABLE>
It was the same way on mine.. i don't think it hung out quite an inch, but I pushed it in as far as I wanted it before I drilled the holes in it to mount to the brackets. They definitely pulled the middle of the lip in. Good luck with yours
#30
Re: [FAQ] How-To: Installing Password:JDM front lip onto USDM 90-91 CRX (Stefndogg)
Dude this is a good post I was iffy at first about them password lips, I had to take of the 1 that was on there cause i guess he had it towed or something it was broken right where the hooks are so i just took it off it looked gay all broke, but your lip looks very very nice to me I was kinda worried about it being to far to the ground and with the horrible terrain here and all...but those are sick...If I was smart id prolly raise it up a bit but dam I seen a few round town and wheel gap just looks so dam ugly to me the dropped stance is the only way I can roll ...need some of them Koni 5 way adjustables but dam those will put a dent in a young mans pocket like myself...anyways yea killer post keep bumping this jewel
#34
Re: (Lost_in_a_world_so_cold)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lost_in_a_world_so_cold »</TD></TR><TR><TD CLASS="quote">These wont fit on USDM 89 HF's will they? I thought they had a small lip that goes in the fog light area of the 91 bumpers....</TD></TR></TABLE>
They do have a small lip (or tab) that goes into the foglight areas. You can see it in this picture:
It MIGHT fit on the 88-89 fronts if you trim these off, but I honestly have NO idea.
They do have a small lip (or tab) that goes into the foglight areas. You can see it in this picture:
It MIGHT fit on the 88-89 fronts if you trim these off, but I honestly have NO idea.
#35
Honda-Tech Member
Join Date: Nov 2005
Location: tampa, fl, usa
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
Re: [FAQ] How-To: Installing Password:JDM front lip onto USDM 90-91 CRX (rayzian)
exactly what lip is on the white hatch? im looking into doing the same mod for my car someone please help!
#36
Honda-Tech Member
Join Date: Nov 2005
Location: CA, US
Posts: 2,034
Likes: 0
Received 0 Likes
on
0 Posts
Re: [FAQ] How-To: Installing Password:JDM front lip onto USDM 90-91 CRX (ORANGE EF)
Looks to be the same lip in this thread trimmed down to fit. If anyone out there's done this to an 89 Si Hatchback let me know lol. Looking to do this soon, but I wouldn't mind rocking the 89 Si lip for a while longer ;P.
#37
Re: [FAQ] How-To: Installing Password:JDM front lip onto USDM 90-91 CRX (ORANGE EF)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ORANGE EF »</TD></TR><TR><TD CLASS="quote">exactly what lip is on the white hatch? im looking into doing the same mod for my car someone please help!</TD></TR></TABLE>
I'm pretty sure the white hatch has the EF9 front lip modded to fit. It looks bigger/lower than the one I have. I picked up an EF9 one for a friend of mine at the same time I got mine, and noticed it was fatter than the EF8, and the tab that goes into the grill section on the EF9 lip is raised up higher from the rest of the lip, than the EF8 one is.
I'm pretty sure the white hatch has the EF9 front lip modded to fit. It looks bigger/lower than the one I have. I picked up an EF9 one for a friend of mine at the same time I got mine, and noticed it was fatter than the EF8, and the tab that goes into the grill section on the EF9 lip is raised up higher from the rest of the lip, than the EF8 one is.
#40
Honda-Tech Member
Re: [FAQ] How-To: Installing Password:JDM front lip onto USDM 90-91 CRX (droppedcrxsi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by droppedcrxsi »</TD></TR><TR><TD CLASS="quote">You are so usdm Adam good work </TD></TR></TABLE>
he's got one JDM taillight though.
he's got one JDM taillight though.
#41
Junior Member
Join Date: Mar 2006
Location: orlando, fl
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Re: [FAQ] How-To: Installing Password:JDM front lip onto USDM 90-91 CRX (Mr_CRX)
now i got a question for you. d you have stock bumber and fenders? cause i noticed you have the jdm sir hood too, so did you get new fenders and buber or is it all usdm?
#42
Re: [FAQ] How-To: Installing Password:JDM front lip onto USDM 90-91 CRX (jdmEF8racer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmEF8racer »</TD></TR><TR><TD CLASS="quote">now i got a question for you. d you have stock bumber and fenders? cause i noticed you have the jdm sir hood too, so did you get new fenders and buber or is it all usdm?</TD></TR></TABLE>
USDM bumper
USDM fenders
USDM FiberImages "JDM SiR style" CF hood. (Fits the USDM front end, but bumps up like the SiR hood.)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by droppedcrxsi »</TD></TR><TR><TD CLASS="quote">You are so usdm Adam good work </TD></TR></TABLE>
What's my wing though, Ryan? Like NZDM? (New Zealand Domestic Market)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ »</TD></TR><TR><TD CLASS="quote">he's got one JDM taillight though. </TD></TR></TABLE>
Yeah I thought I'd find another driver's side one for sale since mine was broken, but nobody wants to sell just one. haha
USDM bumper
USDM fenders
USDM FiberImages "JDM SiR style" CF hood. (Fits the USDM front end, but bumps up like the SiR hood.)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by droppedcrxsi »</TD></TR><TR><TD CLASS="quote">You are so usdm Adam good work </TD></TR></TABLE>
What's my wing though, Ryan? Like NZDM? (New Zealand Domestic Market)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ »</TD></TR><TR><TD CLASS="quote">he's got one JDM taillight though. </TD></TR></TABLE>
Yeah I thought I'd find another driver's side one for sale since mine was broken, but nobody wants to sell just one. haha
#43
Junior Member
Join Date: Mar 2006
Location: orlando, fl
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Re: [FAQ] How-To: Installing Password:JDM front lip onto USDM 90-91 CRX (Mr_CRX)
[QUOTE=Mr_CRX]
USDM bumper
USDM fenders
USDM FiberImages "JDM SiR style" CF hood. (Fits the USDM front end, but bumps up like the SiR hood.)
iight thats kool, where did you get the fenders and bumber from?
USDM bumper
USDM fenders
USDM FiberImages "JDM SiR style" CF hood. (Fits the USDM front end, but bumps up like the SiR hood.)
iight thats kool, where did you get the fenders and bumber from?
#44
Re: [FAQ] How-To: Installing Password:JDM front lip onto USDM 90-91 CRX (jdmEF8racer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmEF8racer »</TD></TR><TR><TD CLASS="quote">
iight thats kool, where did you get the fenders and bumber from?</TD></TR></TABLE>
I'm not sure what you mean..? They're stock. They came on the car from Honda back in 1990
iight thats kool, where did you get the fenders and bumber from?</TD></TR></TABLE>
I'm not sure what you mean..? They're stock. They came on the car from Honda back in 1990
#45
Re: [FAQ] How-To: Installing Password:JDM front lip onto USDM 90-91 CRX (Mr_CRX)
I snapped a couple extra pics of the hood since I had a few people ask about it.
It's made by FiberImages. It is made to fit the stock USDM front end, but it bulges UP like the JDM Si-R hood. It also has NO webbing in the center of the hood, to add more clearance
(Ignore all the dirt. It randomly started raining yesterday in San Diego )
It's made by FiberImages. It is made to fit the stock USDM front end, but it bulges UP like the JDM Si-R hood. It also has NO webbing in the center of the hood, to add more clearance
(Ignore all the dirt. It randomly started raining yesterday in San Diego )
#46
Re: [FAQ] How-To: Installing Password:JDM front lip onto USDM 90-91 CRX (Stefndogg)
Hey I know this is off topic but you dont have the link for those hoods do you those look damn good and I too cannot stand hood pins and you can hardly ever find a CF hood that doesnt have em :D :D :D ???
#47
Honda-Tech Member
Re: [FAQ] How-To: Installing Password:JDM front lip onto USDM 90-91 CRX (sohc88rex)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr_CRX »</TD></TR><TR><TD CLASS="quote">
It's made by FiberImages. </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sohc88rex »</TD></TR><TR><TD CLASS="quote">
you dont have the link for those hoods do you ???</TD></TR></TABLE>
ummmmmm. http://www.fiberimages.com just a crazy guess.
It's made by FiberImages. </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sohc88rex »</TD></TR><TR><TD CLASS="quote">
you dont have the link for those hoods do you ???</TD></TR></TABLE>
ummmmmm. http://www.fiberimages.com just a crazy guess.
#49
Honda-Tech Member
iTrader: (3)
Join Date: Mar 2004
Location: Ca., USA
Posts: 1,320
Likes: 0
Received 0 Likes
on
0 Posts
Re: [FAQ] How-To: Installing Password:JDM front lip onto USDM 90-91 CRX (Mr_CRX)
The lip goes well with that hood.
I'll try to come by and check it out in person. My crx still looks stock.
I'll try to come by and check it out in person. My crx still looks stock.
#50
Honda-Tech Member
Join Date: Apr 2003
Location: Just Drank A 5th of VODKA Dare me to drive, Ca, u.s.
Posts: 11,697
Likes: 0
Received 0 Likes
on
0 Posts
Re: [FAQ] How-To: Installing Password:JDM front lip onto USDM 90-91 CRX (synergy10)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by synergy10 »</TD></TR><TR><TD CLASS="quote">The lip goes well with that hood.
I'll try to come by and check it out in person. My crx still looks stock. </TD></TR></TABLE>
DAMN!!! where the hell have you been?! i was just asking about YOU!!
adam pic whoring his car like NO OTHER!!! it does look pretty damn hard though!
I'll try to come by and check it out in person. My crx still looks stock. </TD></TR></TABLE>
DAMN!!! where the hell have you been?! i was just asking about YOU!!
adam pic whoring his car like NO OTHER!!! it does look pretty damn hard though!