eg_junior

iTrader: (3)

once again a noob question......i'm fixin to purchase an engine and i'm thinking about going with zc dohc. now my question is what auto tranny can fit this, ls, gsr, b16, etc.

which ecu and harness should i get....the year model on the item say 88-92, so i'm thinking obd-0, i could be wrong. i have a 95 dx, can i just use my existing ecu and harness?

mikel_143

wait have yoy purchased zcalready y not just go with b16 0bd1 you will have an almost straight drop and save a lot of trouble with all that any way here is a good site and steve will help you out if needed!!
http://hmotorsonline.com/shop/...30004

ridin98civic

as far as what tranns... its a d-series motor so any d-series tranns

eg_junior

iTrader: (3)

i told you i'm a newb i thought all d-series are single cam i didn't know zc was a d

eg_junior

iTrader: (3)

i'm trying to get a doch and replace my engine, but i'm not going the expensive route since its a daily....but since zc is a 0bd0, i'll probably get just get ls obd1...what you guys think?

eg_junior

iTrader: (3)

if i get an obd1 ls, can i use my ecu and harness or is it better to get a teg ecu and harness???

EG2Driver

your harness will work. You will need the ECU from the teg to make it work. LS is a much better choice than going with the DOHC ZC, more parts readily available

mikel_143

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eg_junior &raquo;</TD></TR><TR><TD CLASS="quote">i told you i'm a newb i thought all d-series are single cam i didn't know zc was a d</TD></TR></TABLE>

im telling you hit that link steve gives warranties on motors and helps if any parts are broke disfunctioning!!!!if you cant afford that then sell zc but hit link best price ive seen in a while.. http://hmotorsonline.com/shop/...30004

eg_junior

iTrader: (3)

i'll keep it in mind...i dont have the zc yet, i'm still trying to decided which to get. since its an auto, i think the b16 would not be necessary.

EG2Driver

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eg_junior &raquo;</TD></TR><TR><TD CLASS="quote">i'll keep it in mind...i dont have the zc yet, i'm still trying to decided which to get. since its an auto, i think the b16 would not be necessary. </TD></TR></TABLE>

yea B16s are overrated.