Daniel_san

well I was installing my new springs on my Koni yellows
( https://honda-tech.com/zeropost?cmd=fshow&id=1 )

and when I though I was done, I lowered the car is this is that I saw under the hood !!
WTF !!

I installed my old springs, and it was fine, what the hell happen here ?







Modified by Daniel_san at 6:34 PM 8/31/2004

TURBOFTW

iTrader: (1)

you are missing like a washer or whatever i forgot exactly what it was called

Marauder

Before you put the top mount with bushings in place, did you put one of the large washers on first? Like #15 in this pic...

racecarpete

yes you are missing #15, it's not a regular flat washer either.

Street Ghost

Most likely, you forgot to install #15.

OT: Is that a CF muffler on your intake? Or is that the eBay version on the AEM V2? Never seen an intake like that before...

crashN2u

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM Ninja &raquo;</TD></TR><TR><TD CLASS="quote">Most likely, you forgot to install #15.

OT: Is that a CF muffler on your intake? Or is that the eBay version on the AEM V2? Never seen an intake like that before...</TD></TR></TABLE>

lol

Marauder

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SilverCivic2k &raquo;</TD></TR><TR><TD CLASS="quote">yes you are missing #15, it's not a regular flat washer either.</TD></TR></TABLE>

Koni gives you a flat washer to put under the cup washer for the bushing.

civic_tuner

First time I did any kind of suspension work, the same thing happened

Daniel_san

yea, I did forget to put #15 on, cause my old Tom motor sport didn't need them cause they had there own cup that replaced the washer.

but luckely I still had the washer from the previous install.

thanks alot guys

Daniel_san

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM Ninja &raquo;</TD></TR><TR><TD CLASS="quote">Most likely, you forgot to install #15.

OT: Is that a CF muffler on your intake? Or is that the eBay version on the AEM V2? Never seen an intake like that before...</TD></TR></TABLE>

you'r just jelous cause I have the lightest intake around !!
haha

yes it is a cheap 30$ Ebay intake, but for 30$ shipped with filter, I just had too.

rodrez.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM Ninja &raquo;</TD></TR><TR><TD CLASS="quote">

OT: Is that a CF muffler on your intake? Or is that the eBay version on the AEM V2? Never seen an intake like that before...</TD></TR></TABLE>

Knock off of the Top Fuel intake.

vtec69

yeah thats what happend to me when i had a crappy shop do my install
you need a washer

ej1 pilot

you need part #15

Daniel_san

alright, I took everything apart, put in washer 15# and it fixed that problem but now it seems like the threaded part of the strut isn't tight at all. I didn't drive my car yet, but when I press down on the bumper my car is'nt stiff at all (half of stock) and see the rubber expande and my strut go higher.

what gives ?

EVILhatch

Are the inner and outter rubber grommets installed correctely?
Both number 7's in the illustration..

CunninLynguist

I would say you are missing number 10.

Daniel_san

****, now I have to miss work tomomow

I'm missing # 7,11,8,10,12,14

I'll take a crack at it tommorow morning

blackdelslo

hahahaha

eL

Yup I believe its #15... my friend had the same problem when installing his tein setup. We were baffled for about 15min.

Cain Marko

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EVILhatch &raquo;</TD></TR><TR><TD CLASS="quote">Are the inner and outter rubber grommets installed correctely?
Both number 7's in the illustration..</TD></TR></TABLE>

it looks like he stacked both on top of each other...

wizzards581

thats what happen to one of they guys here.

jdmsiR20

what you gotta do is take everything apart....

then put it back exactly how the pictures says

The AntiRice

just be grateful you didnt close the hood and then put the car down or you would have 2 nice shock sized dents/holes in the hood.

sinister6

Boognish

lol oops.