wiring harness help!!! pics
i'm to the point of where i need to add wires to my harness... are these where i need to add the wires (1.5 obd1 harness on my jdm 1.8)
is this where i need to add my vtec wires from the old harness? https://img.photobucket.com/albums/v...vtecwiring.jpg and do i need to add this...not sure what its called https://img.photobucket.com/albums/v...41/sensor1.jpg i have the jdm harness that i can tear apart and get those clips and wires |
btw im putting my d15 wiring harness on my jdm b18c and its all complete now i just need to add the aproperate wires
|
Re: wiring harness help!!! pics (untitledsn41)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by untitledsn41 »</TD></TR><TR><TD CLASS="quote">is this where i need to add my vtec wires from the old harness?
s</TD></TR></TABLE> The one wire connector goes to A4. The other one goes to d6 and ground the other wire (it is a two wire connector) <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by untitledsn41 »</TD></TR><TR><TD CLASS="quote">and do i need to add this...not sure what its called</TD></TR></TABLE> That is your map sensor, your old USDM harness will have that plug. |
k, well i found the plug that goes into that map sensor but now there is another spot open, look below in the picture
https://img.photobucket.com/albums/v...mapsensors.jpg the plug is in orange and the 2 slots are in red please explain what to do http://images.honda-tech.com/set1//smile/emcrook.gif |
oh and which one goes to a4 and which one goes to d6???
|
Re: (untitledsn41)
ttt
|
bump, i need help asap. please people
|
All times are GMT -8. The time now is 11:23 AM. |
© 2024 MH Sub I, LLC dba Internet Brands