StreetEG

I have a obd1 b16 in a 92 cx hatch and after having problems with starting and vtec...which still confuse me i started checking all the wiring. Under my dash, in the large clump of wires that plug into my chipped p28 ecu there are three hanging out.... I cant imagine this to be good...

They are:

Red with White stripe
White with Red Stripe
And Orange with blue stripe.

What are these wires where do they go!?

StreetEG

up! some swap guru has to know if this is cool

hatchi

pictures would help identifying the wires

StreetEG

Below is the image u requested with the wire sticking out....
I need help in relation to both my car not starting for weird reasons
https://honda-tech.com/zerothread?id=1317872

and disappearing vtec
https://honda-tech.com/zerothread?id=1317872

Since my car is starting now which i still cant explain i am more concerned about vtec which for those who are too lazy to read this is the problem.

My vtec only engages when i mash on the throttle. If i ease into it, even if i am at full throttle by vtec crossover...it wont make the crossover. This is really annoying. Any suggestions please

StreetEG

bump i need help please!

Kool305

damn that looks aweful..
just buy a new wire harness from a junk yard ,
and re wire it yourself...
that **** u got there looks bad..good luck

StreetEG

Ouch... is there anything else i can do...

is this one fixable?
anyone know what those wires are for?