will i need a a/f gauge when tuning an apexi vafc?
03-26-2005, 04:21 AM
#3
Join Date: Mar 2004
Location: Over here in, SC, USA
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Re: will i need a a/f gauge when tuning an apexi vafc? (AzntaggeR)
Definately need a wide band Oxygen sensor. Your factory one does not read enough for the guage. I have one in my civic and it is just a pretty little light show until I get a wide band o2 sensor. You will not be able to tune anything with factory o2 sensor.
03-26-2005, 09:43 AM
#4
Re: will i need a a/f gauge when tuning an apexi vafc? (Neutex22)
Ok..not meaning to sound un-informed, though am clearly so, can we get this wideband o2 sensor from somewhere? Honda or someplace?
03-26-2005, 10:09 AM
#5
Honda-Tech Member
Join Date: Dec 2004
Location: Jacksonville, fl
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
Re: will i need a a/f gauge when tuning an apexi vafc? (argus)
There's various wb o2 sensors all over the place. Every local performance parts store can usually get them, a lot of online sites have them, and the classifieds usually have a couple too.
03-26-2005, 10:42 AM
#6
Re: will i need a a/f gauge when tuning an apexi vafc? (Ragecloak)
thks for the help man, already looking at Streetrays.com for their PLX M-250 Unit + Wideband Gauge (black) Combo one, it should go with my other guages in the car.
03-26-2005, 10:51 AM
#7
Honda-Tech Member
Re: will i need a a/f gauge when tuning an apexi vafc? (argus)
If you get your vafc tuned with a wideband(like on a dyno), then you dont have to have one in the car all the time.
Trending Topics
03-26-2005, 11:00 AM
#8
Re: will i need a a/f gauge when tuning an apexi vafc? (Slopoke)
Man, we haven't got any dynos down here. I will need it to at least monitor my engine's lean/rich condition when I mess around with my VAFC II.
03-27-2005, 01:07 AM
#11
Member
Join Date: Mar 2004
Location: Somewhere to anywhere, Ca
Posts: 4,982
Likes: 0
Received 6 Likes
on
3 Posts
Re: (Bunda)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bunda »</TD></TR><TR><TD CLASS="quote">yeah im getting it tuned on a dyno..
so no need for a a/f gauge?</TD></TR></TABLE>
Not unless you want to read the condtion your engine is running. I don't mean this like you HAVE to have it or you won't know **** about how your engine is running, just more like open/closed loop and lean or stoch.
so no need for a a/f gauge?</TD></TR></TABLE>
Not unless you want to read the condtion your engine is running. I don't mean this like you HAVE to have it or you won't know **** about how your engine is running, just more like open/closed loop and lean or stoch.
Thread
Thread Starter
Forum
Replies
Last Post
Westrock2000
Acura Integra
9
02-25-2002 05:20 PM
