Will this head fit my engine?
07-11-2002, 03:40 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: Chicagoland, usa
Posts: 5,695
Likes: 0
Received 0 Likes
on
0 Posts
Will this head fit my engine?
Have a 92 Civic VX, wanted to see if this head would be an option or should i look around more? Checking on head replacement from a few suggestions i recieved, any other thoughts (minus engine swap) are welcome 
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1842251102
[QUOTE] This head is from my '95 honda civic ex sohc vtec motor. It will fit most other sohc honda motors including (honda d16a series, d16z6, and d16y8) It is in very good condition and comes complete with everything: Cam gear, VTEC solenoid, VTEC Camshaft, Valve Springs, and Valve/Camshaft guide assembly. THis does not include the valves (they have already been sold seperately). Very well maintained, has less than 79k miles and ran perfectly at the time of removal. If you have any questions e-mail me at: dhearn1@uic.edu [QUOTE]
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1842251102
[QUOTE] This head is from my '95 honda civic ex sohc vtec motor. It will fit most other sohc honda motors including (honda d16a series, d16z6, and d16y8) It is in very good condition and comes complete with everything: Cam gear, VTEC solenoid, VTEC Camshaft, Valve Springs, and Valve/Camshaft guide assembly. THis does not include the valves (they have already been sold seperately). Very well maintained, has less than 79k miles and ran perfectly at the time of removal. If you have any questions e-mail me at: dhearn1@uic.edu [QUOTE]
Thread
Thread Starter
Forum
Replies
Last Post
1boostedcivic
Classifieds: Forced Induction
6
07-14-2004 06:54 AM