Wheel hop = this....
#1
Thread Starter
Join Date: Feb 2005
Location: Grand Blanc, MI, USA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Wheel hop = this....
Allright... so the story goes something like this. I drive a EG with a LS swap. They make pretty decient torque such as everyone says.... but i didn't think this would happen. So I was pulling into my school (University of Northwestern Ohio) where my buddy was hanging out... Well, when i pulled in, i gave it a little gas and started to spin the tires a little bit... but only to find that it was going to wheel hop like a mother. So... within the next few seconds, i hear some loud noise, something scrapping/dragging, and my car being incapable of powering itself any further. So i pull into a parking spot, jump out after popping my hood and find this.......
Sooo... YEAH. I called around all day trying to find somewhere that had a bracket... and i had NO luck... with finding a bracket. The dealership wanted about $220.00 for the two things i needed... and i wasn't paying that. So, one of the salvage places i called that actually had the bracket/mount that i needed, but wouldn't take it off the engine for me because it's sold "with the engine"... i ended up having to buy a 94 B18B1 engine.... Oh well... I paid 350 for it... not a bad price to me considering im probably going to just build this bottom end now.
Sooo... YEAH. I called around all day trying to find somewhere that had a bracket... and i had NO luck... with finding a bracket. The dealership wanted about $220.00 for the two things i needed... and i wasn't paying that. So, one of the salvage places i called that actually had the bracket/mount that i needed, but wouldn't take it off the engine for me because it's sold "with the engine"... i ended up having to buy a 94 B18B1 engine.... Oh well... I paid 350 for it... not a bad price to me considering im probably going to just build this bottom end now.
#4
Honda-Tech Member
Join Date: Feb 2003
Location: NORCAL
Posts: 1,477
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Luserkid)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Luserkid »</TD></TR><TR><TD CLASS="quote">Ouch. </TD></TR></TABLE>
what i was thinkin
what i was thinkin
#6
Member
Join Date: Mar 2004
Location: Somewhere to anywhere, Ca
Posts: 4,982
Likes: 0
Received 6 Likes
on
3 Posts
Re: (9 3 d e l s o l)
Sucks that that happened but it kinda serves you right for trying to show off. And why would you just buy a new engine for MORE than the brackets would cost from honda? Whatever. Good luck with the new engine I guess.
#7
Thread Starter
Join Date: Feb 2005
Location: Grand Blanc, MI, USA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SOHC4life 96)
the axles were allright... except one of them popped the bearings out and i had to search around for them... but i found them all and cleaned them up and they're back in and working fine.
Trending Topics
#11
Honda-Tech Member
Join Date: Jan 2003
Location: Missouri
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SOHC4life 96)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SOHC4life 96 »</TD></TR><TR><TD CLASS="quote">Sucks that that happened but it kinda serves you right for trying to show off. And why would you just buy a new engine for MORE than the brackets would cost from honda? Whatever. Good luck with the new engine I guess. </TD></TR></TABLE>
Maybe because it got an extra b18 for $130 more? That'd be my guess anyways.
Maybe because it got an extra b18 for $130 more? That'd be my guess anyways.
#12
Member
Join Date: Mar 2004
Location: Somewhere to anywhere, Ca
Posts: 4,982
Likes: 0
Received 6 Likes
on
3 Posts
Re: (blaster834)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by r3dh4tch »</TD></TR><TR><TD CLASS="quote">why would i buy $220.00 in parts and then still have to buy another engine when i allready planned on building one. </TD></TR></TABLE>
My bad, I didn't know that engine blew. I thought it was just the mount and the axle. Oh well.
My bad, I didn't know that engine blew. I thought it was just the mount and the axle. Oh well.
#14
Thread Starter
Join Date: Feb 2005
Location: Grand Blanc, MI, USA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Re: (r3dh4tch)
the engine didnt blow... all that happened was the bracket from the engine to the rubber mount broke which caused a CV shaft to pull out of its cup and spin the bearings all over the place. The engine is fine...
#15
I am a (Trial User) Army
Re: (r3dh4tch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by r3dh4tch »</TD></TR><TR><TD CLASS="quote">http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg</TD></TR></TABLE>That's unreal!
It's also amazing that you got a damn engine for $350! All in all, I'd say you made out pretty well.
It's also amazing that you got a damn engine for $350! All in all, I'd say you made out pretty well.
#17
Honda-Tech Member
Join Date: Feb 2005
Location: americas finest, calee fourn ya, united states
Posts: 381
Likes: 0
Received 0 Likes
on
0 Posts
Re: (0utaSight)
why did that happen? was it not mounted with the correct mounts, good deal on getting another B- series engine for that price.
#19
Honda-Tech Member
Re: (blaster834)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blaster834 »</TD></TR><TR><TD CLASS="quote">wow man! never seen that before!</TD></TR></TABLE>
me either.
Did you have the lower torque mounts on the motor?
me either.
Did you have the lower torque mounts on the motor?
#22
Honda-Tech Member
Join Date: Aug 2002
Location: eastside of the beach, westside of the coast, Long Beach, CA, usa
Posts: 1,594
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wheel hop = this.... (r3dh4tch)
man i know how u feel, luckily u had ur timing belt cover on. i didnt and my cam gears landed on my mount, that was the only thing keeping my motor from touching the ground.
snap an axles, broke couple of bolts, had to rethread my block and cost for towing.
snap an axles, broke couple of bolts, had to rethread my block and cost for towing.