What is needed for block ready to install*********
#1
Thread Starter
Join Date: Oct 2002
Location: FUNKYTOWN, AB, Canada
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
What is needed for block ready to install*********
Exactly what the above says,Im putting a gsr block on my b16 and i need to know if i'm missing anything:
1.crank/pistons/rods
2.oil pan/head gasket
3.timing belt
4.front rear seals
5.gurdle
6.block cast
is there anything else im missing,im new at this swap block stuff so i need some info from the experts.thanks
1.crank/pistons/rods
2.oil pan/head gasket
3.timing belt
4.front rear seals
5.gurdle
6.block cast
is there anything else im missing,im new at this swap block stuff so i need some info from the experts.thanks
#2
Moderator
Re: What is needed for block ready to install********* (rocco)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rocco »</TD></TR><TR><TD CLASS="quote">ttt</TD></TR></TABLE>
don't bump a thread after 10 minutes!!
do a search...all the info you need is there
dont' forget head studs in that list!
don't bump a thread after 10 minutes!!
do a search...all the info you need is there
dont' forget head studs in that list!
Thread
Thread Starter
Forum
Replies
Last Post