What cam gears are better?
#1
Honda-Tech Member
Thread Starter
What cam gears are better?
hey, so i got a B20/VTEC and i need to get cam gears so i can finally put it in, but i dont know which ones to get im lost and need help let me kno what you guys think heres my setup...
-JDM B20B Block Stock Sleeves : Slightly Decked
-00 GSR Head Stock Cams/Valves/Vlalvesprings/Retainers : SLightly resurfaced
-Wiseco 11.8:1 Flat top Piston
-Crower H Beam Rods
-ACL Performance Bearings
Im pretty sure thats all the info you guys need if you need more let me know, and when i say slighly resurfaced and decked i mean just enough to have a clean surface
The cam gears i have in mind are Crower(4 bolt design), Buddy Club (4 Bolt design), Blox (5 Bolt Design), AEM (5 Bolt Design), Skunk2 (6 Bolt Design).
heres the thing crowers a good name but 4 bolt design for so much more than everyone else jus seems iffy to me, ive always loved BLOX products but never heard anything about there cam gears, AEM's im always hearing bad things bout the 3 bolt design but idk how there 5 bolt is. Let me KNOW
by the way planing on building the head alot more with a taste of either nitrous or Boost
AND SERIOUSLY NOT TRYING TO HEAR PEOPLE JUDGING MY SETUP THIS ISNT A POST ASKING IF MY MOTOR IS COOL ENOUGH FOR ANYONE I JUST DONT HAVE ANY EXPERIENCE WITH AFTERMARKET CAM GEARS AND COULD USE SOME HELP FROM PEOPLE WITH EXPERIENCE THANKS
-JDM B20B Block Stock Sleeves : Slightly Decked
-00 GSR Head Stock Cams/Valves/Vlalvesprings/Retainers : SLightly resurfaced
-Wiseco 11.8:1 Flat top Piston
-Crower H Beam Rods
-ACL Performance Bearings
Im pretty sure thats all the info you guys need if you need more let me know, and when i say slighly resurfaced and decked i mean just enough to have a clean surface
The cam gears i have in mind are Crower(4 bolt design), Buddy Club (4 Bolt design), Blox (5 Bolt Design), AEM (5 Bolt Design), Skunk2 (6 Bolt Design).
heres the thing crowers a good name but 4 bolt design for so much more than everyone else jus seems iffy to me, ive always loved BLOX products but never heard anything about there cam gears, AEM's im always hearing bad things bout the 3 bolt design but idk how there 5 bolt is. Let me KNOW
by the way planing on building the head alot more with a taste of either nitrous or Boost
AND SERIOUSLY NOT TRYING TO HEAR PEOPLE JUDGING MY SETUP THIS ISNT A POST ASKING IF MY MOTOR IS COOL ENOUGH FOR ANYONE I JUST DONT HAVE ANY EXPERIENCE WITH AFTERMARKET CAM GEARS AND COULD USE SOME HELP FROM PEOPLE WITH EXPERIENCE THANKS
Thread
Thread Starter
Forum
Replies
Last Post
InvaderTrax
All Motor / Naturally Aspirated
4
05-28-2006 09:10 PM