CFDOHCVTECEG

I have a walboro fuel pump, and I'm running way too much fuel pressure because of it. The fuel pressure guage I have is reading about 50 psi on the stock regulator, and with the b&m regulator the lowest I can get it is 48 psi, why is this? I think the fuel pressure is making my car randomly die, and backfire a good bit, and it skips in higher rpms. I was thinking about putting a resistor inline with the pump. does anyone know of anymore ideas to lower my fuel pressure?

beaneg6

what motor do you have the requires a walbro? if you dont need it put a stock pump in there!

Eran

iTrader: (1)

Just put a stock pump in .... and sell the walboro to someone who needs it.

CFDOHCVTECEG

that's the thing I'm gonna need it when I get my turbo, and plus I'm don't have the stock one anymore, I let my friend use it in his hatch cuz it went out, but I may be able to get it back.

CFDOHCVTECEG

Also I have a b16a in there right now.

turbociviccoupe

put everything to stock. pump+regulator

beaneg6

buy a stock fuel pump and save the walbro for when you go turbo