vtec question

Reply Subscribe

Thread Tools

Search this Thread

01-01-2009, 07:38 PM

heffnerp97

Junior Member

Thread Starter

Join Date: Mar 2008

Posts: 6

Likes: 0

Received 0 Likes on 0 Posts

vtec question

how do i run vtec on a d16z6 straight from the solenoid to the ECU??
i have a non vtec wiring harness bc the car came non vtec and i put the z6 in it and i aint sure how to run the vtec??

Any body know how??

Reply Like

01-01-2009, 07:56 PM

1.5Slowmatic

Honda-Tech Member

Join Date: May 2008

Location: Sykesville, MD, USA

Posts: 3,032

Likes: 0

Received 0 Likes on 0 Posts

Re: vtec question

2 ways, either get a wiring harness from a 92 or 93-95Ex/Si or run the two wires from the pressure switch to the ECU pins

Reply Like

01-01-2009, 08:00 PM

z6hatchboy

Honda-Tech Member

Join Date: Dec 2007

Posts: 2,686

Likes: 0

Received 1 Like on 1 Post

Re: vtec question

go to ff-squad.net (maybe .com) and go to their tech section, they have ecu pin outs smf stuff. You ground one the wires and the other goes to the ecu i believe

Reply Like

01-01-2009, 08:05 PM

1.5Slowmatic

Honda-Tech Member

Join Date: May 2008

Location: Sykesville, MD, USA

Posts: 3,032

Likes: 0

Received 0 Likes on 0 Posts

Re: vtec question

Quote:

Originally Posted by z6hatchboy

go to ff-squad.net (maybe .com) and go to their tech section, they have ecu pin outs smf stuff. You ground one the wires and the other goes to the ecu i believe

no they go to D6 and A4

Reply Like